Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hey people, i have a 1.2 16v clio on an '03 plate. Can somebody please tell me which wire i need to cut into for the remote lead which goes to the amplifier. I have wired everything else up but i just cant get power to the amp!
Have you got a standard HU or aftermarket?
If its afermarket then there should be a blue wire seperate to the harness of which you should attatch the remote cable from your amplifier too!
failing that its the secondary power cable from the hu to the connector block of the standard clio conectors... buh ive only ever seen one thats not blue
make sure if you tappint the ignition feed that you spade it dont chop it off it needs to go to both the HU and the remote wire so make a small insition to see the wire and then poke the copper in and then tape it up ... or you could get a 2 into 1 conector