ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
This must be a scam? Brembo content
- Thread starter Crybert
- Start date
MX5 NC 2.0 Sport
I went for the Megane 3 RS one's, so he is now officialy sold-out :grin:
Already testfitted a set of these on the sunflower, looked absolutely awesome but these ones where horrible (corrosion knackered them completely).
In my opionion an even better option than the 197 ones, more pad and an even better fit to the 300mm discs.
Already testfitted a set of these on the sunflower, looked absolutely awesome but these ones where horrible (corrosion knackered them completely).
In my opionion an even better option than the 197 ones, more pad and an even better fit to the 300mm discs.
Offset difference is 15mm iirc so sticking some 15mm front spacers on will achieve the same.
.
MX5 NC 2.0 Sport
I had the oppertunity to buy a set of mk3 275 calipers, but as no one has ever tried this before i first opted to check if it would fit on the 172/182.
In the end, i could mount them on the exact same brackets as i already use for my 225 brembo setup.
The calipers and pads are a bit bigger and because of this you have more pad on the disc -> even greater stopping power :up:
bozothenutter
ClioSport Club Member
Ooh I like this....are the 275 brembo's available in silver?
What pad do they use?
What are the piston sizes/mbc size?
What pad do they use?
What are the piston sizes/mbc size?
Ha ha, he'd probably think otherwise given your opening gambit was to question his integrity! lol
MX5 NC 2.0 Sport
These are allot more common in silver than they are in red, pretty much the same with the older style brembo's though.
Pads of the mk3 275 calipers :
I already have new pins and these pads here, and i can confirm that these are indeed correct!
Brembo part number : P54040
Renault Clio 16v
Is that for 300mm discs? @SmokeyTheBandit
Clio 182 Trophy
Can anyone confirm if the MK3 Brembos will go under 15" 2118s? I understand they will need custom brackets and spacers but if I can get them to work I will go for it. Also, I assume I would need the 280mm discs as the 300mm may be too much of a squeeze.
Supercharged AG 200
They would do mate..... I weighed up all the factors and couldn't justify based on the braking power I get from the existing with good pads......
They do look pretty though:hearteyes:
MX5 NC 2.0 Sport
You will need to mill of a few mm on the normal 200 brembo's already to get them to fit on the 280mm discs. These are even bigger so unless you mill of even more and basically remove the structure it will absolutely not fit. To note i can bearly get a hair between the calipers and my renault oz f1 16" wheels.
