Track car geo setup

[Greeny.]

Looking at getting my track cars geo setup sorted as its all over the place atm, could anyone give me some advice on what I should be asking to be set, front camber, toe and rear camber wise, I do have to drive it to and from the track so don't want anything to aggressive not that I hammer it on the road anyway!

The car will have its corner weight and ride height checked at the same time.

Cheers,
Dan

 

[MarkX]

Looking at getting my track cars geo setup sorted as its all over the place atm, could anyone give me some advice on what I should be asking to be set, front camber, toe and rear camber wise, I do have to drive it to and from the track so don't want anything to aggressive not that I hammer it on the road anyway!

The car will have its corner weight and ride height checked at the same time.

Cheers,
Dan

mine is
Front
3 degrees -ve camber
5.8 degrees castor
10 mins total toe out

Rear
1.4 -ve degrees camber
zero toe (needed shims)

I'm happy with it, but tbh I've not tried anything else on track

 

[scotiamr2t]

I run almost the same as Mark above, other than i run 3.5 degrees negative camber on the front, rear i have 30mins total toe in and 2 degrees negative camber

 

[EVOgone]

How do you get near 6 deg caster?

 

[NorthloopCup]

How do you get near 6 deg caster?

Ast top mounts I assume. Unless he's modified the cup wishbones for a bit more.

 

[EVOgone]

Not seen top mounts make that much difference. I have PMS caster adjustable wishbones and get 4ish deg when maxed out....no where near 5 plus.

RR results.. ??

 

[MarkX]

How do you get near 6 deg caster?

yeah, Ast top mounts, there's more castor there but would be at the expense of camber.