turbocharger for clio on ebay

[chris79]

Quite interesting this :-

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2471058007&category=32094http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2471058007&category=32094

Anyone done this before ? quite cheap for the price, but states prototype, wonder why its being sold.

 

[coolspot007007]

looks like red 16s car, i think he ran out of cash.

 

[Red16]

yeah its mine, change of plan since i got my motor bike, decided to have a garage clearout n see how the parts sold on ebay, happy bidding you lot

 

[u33db]

heh - did you actually get it fired up btw?

 

[Red16]

no never had if fired up just managed to make the manifold fit the cylinder head and turbo, with enough room for nothing to catch the bulkhead of the car

 

[chris79]

would you need to adjust all the fuelling etc on the car ? any idea what sort of psi it could handle on a non modded engine ?

 

[Red16]

i wouldnt run it on a non modded engine to be honest,compression ratio is too high at 10:1.



the fueling would be controlled throught the use of a 21 turbo ecu and the relevant sensors injectors etc

 

[stan*]

thing is a 21 turbo ECU runs more ignition advance cos its 4 an 8v. 16v requires less advance, so ud need to get a re-mappable chip anyway. might aswell just by fastchip

 

[Red16]

i have been in contact with a lad in france who has a williams turbo running on 21 turbo management, there must be sum1 in england who could write a chip for this application. its not as simple as just buying a fastchip ecu etc, as the fueling etc wouldnt be set up for the spec of the engine it would be intended to run.

 

[stan*]

fastchip supply a chip for an F7P turbo m8--same 1 BB tuning use

 

[edde]

Quote: Originally posted by Red16 on 04 April 2004

there must be sum1 in england who could write a chip for this application. its not as simple as just buying a fastchip ecu etc, as the fueling etc wouldnt be set up for the spec of the engine it would be intended to run.

A stand alone ECU would be able to do it I belive. Then any remapper could do the software for you.

 

[Red16]

Quote: Originally posted by stan* on 04 April 2004

fastchip supply a chip for an F7P turbo m8--same 1 BB tuning use

yeah i know this but the turbo engine i was building used a larger (t3) turbo than the bb/fastchip, so the fueling would not be the same for the engine i was building and the fastchip/bb engine.

 

[Red16]

Quote: Originally posted by edde on 04 April 2004

Quote: Originally posted by Red16 on 04 April 2004

there must be sum1 in england who could write a chip for this application. its not as simple as just buying a fastchip ecu etc, as the fueling etc wouldnt be set up for the spec of the engine it would be intended to run.

A stand alone ECU would be able to do it I belive. Then any remapper could do the software for you.



i agree but standalone management is rather pricey!

 

[turbo man]

Fastchip can remapp the chips to run on any 16v turbo. It isnt a case of just throwing one in. I am off to Holland next week to ge tmine done by Henk!