ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
-
Struggler replied to the thread Disturb crank seal?.also what sealant do people recommend?! since you lot are making me do this!!! And anyone local to essex have the correct tool? -
Struggler replied to the thread Disturb crank seal?.I assume this is ID/OD? Looks like you could probably use something like this (ebay special) as long as you can make sure you don't...
-
-
Struggler replied to the thread 5A ECU Fuse Constantly Blowing.This is what I do. Touching the two probes gets about 0.6ohms resistance. I think the I/O beeps up to ~50ohm. Between in 28 and 30 I...
-
Struggler replied to the thread 5A ECU Fuse Constantly Blowing.Yup basically zero. Could moisture have got into the ECU and shorted the pins on the PCB?
-
Struggler replied to the thread ARP rod bolts upgrade.Also, yikes! Is it meant to be that close? Gna drop PMS an email in the morning and see what they have to say for themselves.
-
-
Struggler replied to the thread ARP rod bolts upgrade.So I fitted all my ARP bolts tonight and the oil pump. Went to fit the sump on (no windage tray but I don't want to leave it open) and...
-
Struggler replied to the thread 5A ECU Fuse Constantly Blowing.Had a quick check here on an old ph1 ECU. Couldn't detect any meaningful continuity between the pins, maybe a little in the order of...
-
Struggler replied to the thread Disturb crank seal?.I can confirm that i do not have that tool. i think my concern is removing the clasp that holds the main bearing and trying to seal...
-
Struggler replied to the thread ARP rod bolts upgrade.Thanks, i think i agree, will do a side by side when the new one comes and that should sort it all!!
-
Struggler replied to the thread Disturb crank seal?.It's a tie so far so I've cast my vote to leave to balance it in the way I want! Which tool is that? The one to put the plastic seal on?
-
Struggler replied to the thread ARP rod bolts upgrade.i meant to post more pictures than that. Was on my phone. Does that make it easier to confirm? I've bought another one anyway now so...
-
-
I'm really on the fence about resealing the rear (flywheel) crank seal. I know it's a common leak point and people recommend doing it...
-
-
Struggler replied to the thread 5A ECU Fuse Constantly Blowing.I've packed up for today, but can check tomorrow when I get home from work! There's a thread from kitson about gen90 and fuel pump if...
-
Struggler replied to the thread ARP rod bolts upgrade.It doesn't want to slot into the gap really at all.
-
Struggler replied to the thread ARP rod bolts upgrade.I think I may also have the wrong windage tray, which would track as it's a pretty early ph1. Are you able to confirm from the picture?
-
-
-
Loading…
-
Loading…
