dann2707
ClioSport Club Member
Absolutely not are you retarded?
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Power Tool Perverts
- Thread starter Crayola
- Start date
997.1, Caddy, e208
I want this one
www.screwfix.com
Milwaukee M18CHT-0 FUEL 60cm 18V Li-Ion RedLithium Brushless Cordless Hedge Trimmer - Bare - Screwfix
Order online at Screwfix.com. Delivers the capability to swap between multiple attachments to complete a wide range of applications while maintaining the flexible battery system working with all Milwaukee M18 batteries. Powerstate brushless motor provides increased efficiency, lasts longer and...
dann2707
ClioSport Club Member
I really wouldn't recommend screwfix for milwaukee stuffI want this one
Milwaukee M18CHT-0 FUEL 60cm 18V Li-Ion RedLithium Brushless Cordless Hedge Trimmer - Bare - Screwfix
Order online at Screwfix.com. Delivers the capability to swap between multiple attachments to complete a wide range of applications while maintaining the flexible battery system working with all Milwaukee M18 batteries. Powerstate brushless motor provides increased efficiency, lasts longer and...
They're 95% more expensive than powertoolmate
Only the wet dry vac is cheaper for some reason
I have this one
Milwaukee M18CHT-0 M18 Fuel Hedge Trimmer Bare Unit
rctempire
ClioSport Moderator
I cannot believe how much these dewalt green laser levels have gone up in price.
I got this exact kit for £220 in the middle of 2022 and my eyes watered at it.
It does 3d levels and saved my bacon multiple times so worth it in my eyes.
Now showing as £350 upwards. Mental.
I got this exact kit for £220 in the middle of 2022 and my eyes watered at it.
It does 3d levels and saved my bacon multiple times so worth it in my eyes.
Now showing as £350 upwards. Mental.
dann2707
ClioSport Club Member
Wow that's a right increase!
With me just being a diyer I don't use mine often, but when I have bloody hell it's been so f**king useful!
Used mine to do the tiling in the kitchen
Run the conduit outside the house level
Fit the living room mirror and oak beam for the fire
And probably a few other bits I've missed!
Because mines an aliexpress huaper special I do sometimes think the China man who built it may have been on his last day and completely fucked up the calibration for a laugh, not by an obvious amount, but just enough to make him smile when I realise it's out 5 years later 😂
rctempire
ClioSport Moderator
Dont use mine regular either, its just handy to have. Plus at that price now seems a bargain.
The level flickers when its not level too, so handy feature, but the 3d was great when building the media wall.
I noticed mine was out recently when hanging frames, but turns out it was the cheap tripod that was causing it to go out. So need a new tripod now. Not got that yet. I do really fancy the laser pole. But the dewalt one at £120 is taking the piss.
It does look good
dann2707
ClioSport Club Member
I got this one in the end, and it's spot on for the money. Having the ability to use the tripod of the floor to roof pole is mint
chazza114
ClioSport Club Member
My PowerToolMate prize arrived today, pretty chuffed with it! Will go nicely alongside my Milwaukee M12 compact ratchet 
Matt e
ClioSport Club Member
Just seen this one Facebook
Andy_con
ClioSport Club Member
clio 182
green laser and green glasses... funky
R5gtt, 182, volvo...
rctempire
ClioSport Moderator
Strange i literally got delivery of this yesterday.
Huepar PV10+ Fine-tuning Bracket Adapter
Positioning Device for Line Lasers: The laser level bracket with 1/4"-20 male thread, the maximum depth from the 1/4''-20 thread to the back of the bracket is 8.5cm. It is compatible with most cross line laser levels with 1/4" female thread. If your laser level has a 5/8" female thread, please...
uk.huepar.com
May need to check that tripod / monopole out now.
Dom_capper
ClioSport Club Member
2012 Renault Clio
Which red grinder should I buy? I’m thinking I’d prefer a switch to a paddle. Anyone got experience with a paddle? Is it a ball ache having to hold it down?
dann2707
ClioSport Club Member
I was dual wielding mine earlier as one had a cut disc the other had a flap disc and I was very grateful for the flappy flaps! They're really decent and now it feels mega uncomfortable using a switch to me
Ive had mine for coming up 7 years now and its fine much prefer it to a switch now as @dann2707 says.
Unless you've got girly hands and scared of holding it🤣🤣🤣
Dom_capper
ClioSport Club Member
2012 Renault Clio
Thanks chaps. I guess it was just the situations where you’re holding it awkward for a tight gap, but I’ve got switch cable ones of needs be.
Dom_capper
ClioSport Club Member
2012 Renault Clio
I do a lot of cutting with the grinder at 90*. They comfy for that too or just flappy disks?
Everything, if you're doing a lot with it buy a decent sized battery
Sir Nancy Flowers
ClioSport Club Member
M140i
Not new new as such, but ive been wanting a MIG since trying my father in laws
Ive been practising stick welding, but for what I will inevitably end up welding for, its just overkill. I also really struggled to make it 'look' decent - but I managed reasonable welds to be fair to me (I have 0 formal training).
Whilst ill in bed ill, I was browsing ebay (as you do) and thought id have a look. This one cropped up - short auction and no reserve. I did a quick bit of research and saw they were £375 on a deal new. I figured if I could get this under £100, id be onto a winner.
£62. BOSH!
Plenty of wire left and just need a bottle of gas. Whoop!
JamesBryan
ClioSport Club Member
A grinder and paint makes you the welder you aint 😂
dann2707
ClioSport Club Member
Received this in pedo green today (milwaukee don't do one shame 😂)
Got it for fertilising your mum and overseeding the 9m^2 of grass I have 😂😂
Will come in handy for spreading salt on the path as that gets ridiculously slippy when it's cold
Got it for fertilising your mum and overseeding the 9m^2 of grass I have 😂😂
Will come in handy for spreading salt on the path as that gets ridiculously slippy when it's cold
Dom_capper
ClioSport Club Member
2012 Renault Clio
Ordered. Dpd guy ‘missed’ the warehouse loading bay and front door of work so it’s coming Monday now.
I’ve got quite a few 5ah so I don’t mind going through them.
Still an excuse to get some 12ah though 🤣🤣
Crayola
ClioSport Club Member
I'd expect that to shake all the rust away from the land rover until it's just 4 tyres and a steering wheel left on the floor 😂
JamesBryan
ClioSport Club Member
Wondered who'd be the first on here to get the Gen 3 High Torque.
Yeah that may well be the case. We will have to see how it goes!
I have used the 1/2” stubby for a few years and it’s really good and easy to use. But doesn’t have the guts for the big stuff. And I got sick of bashing my hand when bits give way/slip when using a ratchet/breaker bar.
Saw this coming up in US reviews and looking like the one. So treated myself.
See that's why you need the 3/8, 1/2, 3/4 and inch plus the ratchets
Did you not read my above post??? You NEED all the rest
dann2707
ClioSport Club Member
Very jealous! Your poor wrist looks like it's massively strained holding it sans battery 😂
Crayola
ClioSport Club Member
A week ago my big 12ah battery died
It was under warranty luckily so I put in a request, weird one though. They just wanted me to peel the sticker from the bottom of the battery and send that off to them including proof of purchase
Apparently you're not allowed to ship the 12ah batteries unless they're in the original packaging
Either way. Nice free and new battery
It was under warranty luckily so I put in a request, weird one though. They just wanted me to peel the sticker from the bottom of the battery and send that off to them including proof of purchase
Apparently you're not allowed to ship the 12ah batteries unless they're in the original packaging
Either way. Nice free and new battery
JamesBryan
ClioSport Club Member
They did the same when my dad sent his Ryobi multitool, just wanted the label and then sent a new tool out.
Crayola
ClioSport Club Member
I think it's something to do with them not wanting to recycle the tools afterwards
There's a load of weird s**t for ESG reporting now where if you can say "we've only sent X tonnes to landfill" then the government will put you in a different bracket on certain schemes. It's all about carbon credits etc now, we've come across is due to the size of the company and the group were part of
