ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Clio 1.8 16v - "barn" find

Here goes nothing :ROFLMAO:

It’s been sitting in a forest in pretty much the same spot for seven years, and for the last three, I’ve been trying to convince the guy to sell it to me...

Well, today was the day.

So, here it is in all its glory: a 1991 Clio 1.8 16v (Phase 1 Diac), cat-less version, rotten as can be, but with paperwork and nearly complete.

The plan is to first give the car a thorough inspection—inside and out—to see exactly what’s there and what’s missing. I believe it was last registered back in 2013.

It is the Diac version, though it has different seats.

Anyway, it’s ideal as a donor car for parts—or for transferring everything to another chassis for homologation—but we’ll see how it goes.
:)



20260930_113730.jpg

20260930_113741.jpg


20260930_125902.jpg

20260930_130306.jpg


20260930_130314.jpg


20260930_130318.jpg


20260930_130905.jpg


20260930_142950.jpg


20260930_142958.jpg
 
If this car could talk, I bet it would have quite a story to tell...

What puzzled me was that the car is grey, yet the engine bay and the entire interior are pearl white... I didn't get any answers from the owner, nor any photos of the car from the past, and I kept thinking it was a shame—I’d really love to know what the car used to look like...

So, I kept tirelessly Googling, trying to find old listings for Clio 1.8 16v models, and this one thread kept popping up: (Croatian Renault forum, thread for all clio 16v and williams in Croatia)




I hadn't opened it because I thought, "Nah, there's no chance it's in there..."
Just as I was about to give up on the search, I clicked on the thread, started scrolling through, and couldn't believe what I saw:

1791194435075.webp

THE CLIO WAS IN THAT THREAD 😵 What are the odds... Two (or three) specific details match up, confirming that this is indeed the very same Clio:
The TSW Wheels sticker on the rear side window, the Williams sticker on the trunk trim, and, of course, the pearl white paint...
1791194626551.webp

Unfortunately, there aren't many further details, other than a post by one forum member saying he knew the guy and had posted the ad for him; however, that member hasn't been active on the forum for a long time, so I doubt I'll get any more info from him...
What a car, what a story... truly. I took a closer look at everything today, and I’d say the car was professionally painted pearl white; someone really put in the effort, since the engine bay and the cabin were painted too...
I don't know how it ended up in its current grey color, but it was done poorly..

What a shame—things deteriorate so easily when they aren't taken care of...

Anyway, today I took out all the stuff that came with the car; I wouldn't exactly call it useful, but oh well... What the car is missing is the intake manifold and the VIN plate from the radiator support... I asked the previous owner, and he said he found that odd and would look for them again...
And yeah, the engine wiring harness has been cut in two places, and—of course—the cut-off sections are nowhere to be found... just great...
The car had been sitting at a friend of the owner's place, and all sorts of things happened there; who knows what went down, but the fact remains that a few—let's call them essential—parts are missing... hopefully, they'll turn up...
Since the car has been without an intake manifold for quite a while, the intake ports were in a bit of a state (see photos below), so I gave them a quick blow-out with the compressor and sprayed them with a mixture of ATF and acetone—I did the same for the cylinders after removing the spark plugs...

20261003_183800.jpg


20261003_183809.jpg

The engine turns over. It was a bit reluctant to start moving at first, but now it spins freely; I suspect the alternator seized a bit. I even managed to get it to crank, but it seems like the starter motor is on its last legs; it turns slowly and needs a tap just to get spinning...
1791194590403.webp


I took a look underneath, too—the condition is bad, but realistically, what could one expect...

The engine and gearbox appear to be the originals for the Phase 1 model: F7P 700 and JB3 048.
I was actually surprised that the front sections of the rocker panels are relatively solid; I was able to jack the car up without any issues.

What next? wait for the owner to try and dig out the intake manifold & get a hold of engine harness.. And need to find a solid shell to part out for healthy metal for this rust bucket..
Good thing bordanova sport has replica rear quarters. I think the car is originally white, and thats quite rare here in Crotia, but since the car doesent have a plate underneath the hood, cant know how to check it..

Plan is, after all the metal work is done, to have a wide front track conversion, and tune up the F7P a bit, but long way to go still..

Cheers!
 
That's a huge project you've taken on, good luck. It'll be a toss up between repairing the shell or getting a better shell to put the bits on. If you get a good shell that is easier to paint that may tip the balance.
 
Yea.. clio 16v are getting raaare in Croatia, very rare.. almost none on the streets anymore..
I dreamed about clio 16v for years after my brother bought one and drove me in it.. the intake sound, the interior, the exterior.. its nuts.. in my opinion better than 1x2, regarding the experience.

But since that was long time ago, I am thinking about sorting a test drive in a 16v to see if its just a memory or if the car is gonna give me the "chills" and motivation to throw money into building my own.
 
The VIN is also stamped onto the suspension tower on the passenger side of the engine bay and I'm fairly sure the colour code for the paint is part of that number
 
As for the metal repairs, sills are still widely available, the jacking points are as well but I only know of the ones available in the UK and obviously Bordanova for the rear quarters.
The inner sill structures will be the biggest issue with the repairs, you can use Renault 5 GTT repair parts which are available in a few places but it depends how deep the rust goes.

As an FYI, if you remove the outer skin of the rear quarters, the structure in there is exactly the same as all of the 3 door Mk1 Clio's so you don't specifically need a 16v shell as a donor
 
Quite by chance, I ran into the person who owned the car before it was painted pearlescent. I reached out to him regarding some bodywork, sent a few photos, and the guy says, "That was my car!" – can you believe it? 🤣

He bought it (from Rijeka/Bakar) about 20 years ago. He mentioned that the car wasn't in great shape back then, though it was fast and had around 200,000 km on the clock. Eventually, it ended up with the guy who gave it that pearlescent paint job.

Now, since forum member on Croatian forum claims the car was in top condition, either the guy who did the pearlescent paint job invested a huge amount of work into it, or these are actually two different cars.

The good news is that the previous owner found an intake manifold, so I need to pick that up. However, I’m still left with a cut-up engine wiring harness..
 
Guys watching this thread that have experience in valvers
Is the front subframe specific to the valver, or is it same as 1.4S front subframe? (Generic clio 1 front subframe)

Is there any point in strenghtening the front subframe (like stitch welding)?

I am thinking about wide front track and I know the popular option is clio 1x2 and clio willy/r19 16v ARB, but megane F7R has the same arb and wishbones, so I will be using that, and need hopefully jc5 and f7r driveshafts. Any other tips?
are the top mounts same as clio 1x2?

Can the pms strut brace with solid top mounts from clio 1x2 be used on a valver?
@16v_paddy @Brigsy @16V F7R @Coops Mk1
 
The front subframe is exactly the same on all Mk1 Clio's, it's only the williams that is slightly different with some extra bits welded onto it, as for stitch welding it, if you can do it yourself I suppose it can't hurt but I haven't bothered to do it on mine as I can't weld and can't be bothered to spend money on that

PMS do a strut brace for the 16v/Williams, the 1*2 one doesn't fit as the strut towers are further apart (27mm iirc) on the Mk2

There's a few different ways you can do the widetrack, the common one people do is the 1*2 stuff as it's all readily available over here. The ARB & wishbones are easy, it's the shock absorbers, stub axles, hubs & driveshafts that you need to pay attention to and have the right combination of bits depending on what shocks and/or driveshafts you use. You have to use either Williams or Ph1 172 shafts as they're the only ones that are the correct length to work in a Mk1 and you also have to have the matching hub drive flange pressed into the stub axle as the CV joint splines are different sizes
 
I agree. Heck of a project. Love the optimism and I’m sure the journey will be epic. I can see a re-shell coming! Good luck with it and looking forward to updates.
 
Time for an update.

The previous owner found an intake manifold and also gifted me a set of adjustable Koni rear shock absorbers (the yellow ones).



20261017_202936.thumb.jpg.47c2e68a069f984b3d2e57204e73f051.jpg


20261017_202939.thumb.jpg.5d25c1447af61a07f489835ad4c0681d.jpg


20261017_202950.thumb.jpg.a2b6c576016fc1dcb61ce26f319425f4.jpg


20261017_2029423.thumb.jpg.470134c4b840a694631ba8869a209bd8.jpg
The intake manifold is complete but extremely dirty. The wires to the TPS (throttle position sensor) have snapped off; apparently, this is a common issue, and a new TPS costs around €200...

He also gave me the connector, so at least it’s all there—though the wires broke off right at the point where they enter the plastic housing, which makes soldering them quite tricky.

I took the TPS apart—the plastic was brittle and cracked, as expected—but I managed to expose enough of the wires to attempt a solder job.

The wires on the connector aren't original; they’re silver-colored and wouldn't take the solder at all. Still, I managed to get them joined somehow—we’ll see if it actually works.


20261020_212718.thumb.jpg.b206c963576ce40e73ded8ceb89b8576.jpg


20261020_212719.thumb.jpg.9c514b95a9156c9adb83a1e770bc8d41.jpg


20261020_212727.thumb.jpg.b2dc6e691a58b4f7048a7933905fe094.jpg


20261020_212902.thumb.jpg.1b284f3cbffe75f4550153684fd63fe7.jpg


20261020_213427.thumb.jpg.978d866587452f9e380afaf3842e913a.jpg


20261020_215544.thumb.jpg.15d89608ab2a897c4ef79fa7ac03b9cf.jpg
 
20261020_225221.thumb.jpg.cafc3af93f8f633a4069977ed77e78eb.jpg
I’ve cleaned the outside of the intake manifold and the throttle body, but the inside still needs a good wash.



20261020_212436.thumb.jpg.ce637878087523d60e5bbd0af13d69c6.jpg


20261020_212525.thumb.jpg.5fe99a0b7e0347ada4c20cb62c8d36e8.jpg


20261020_212519.thumb.jpg.7771b0d0009b3f8827535f54ca77bc4a.jpg





20261020_212410.thumb.jpg.0b59513dc278ed7d4f34d6e0499537fd.jpg

A broken-off section where a bracket should attach.



20261020_212448.thumb.jpg.d483be15f97c48fa6df39c8599dd876a.jpg

It’s filthy inside—basically a thick layer of oil sludge and carbon deposits.

My guess is that the engine was pushing a lot of oil through the breather system (crankcase ventilation), which caused all this buildup.




20261020_212500.thumb.jpg.a57cbbabb713f11e4c0d14abf6871a1d.jpg

I found an engine wiring harness in Italy for a decent price—it’s in good condition—so I compared it to mine to confirm that mine is indeed a "Phase 1" version and to see exactly what had been cut or removed from my original harness.

In the process, I discovered that the car was originally white, which is quite rare. engine bay

20261020_201616.thumb.jpg.c494e5e80eee61ac97af32041afb65ff.jpg
20261020_201540.thumb.jpg.4cf2d87eb5b115218789a910459cabb5.jpg
 
Basically, here is what I found cut:

4 wires leading to/from the ignition coil

3 wires leading to/from the fuel rail wiring harness

A bundle of wires leading to/from the fuel rail/thermostat harness, etc.

2 wires from the crankshaft sensor

My initial assumption was that someone had cut these wires and taken parts—given where the car was parked, that wouldn't have been surprising...

Almost all the connectors were unplugged, so I started identifying each one, plugging them back in, and essentially "tracing" the wiring harness.

To my (un)pleasant surprise, it turned out the harness wasn't cut for the sake of theft; I managed to locate the other ends of almost all the cut wires. This suggests someone did it intentionally—to prevent the car from starting... unbelievable...

I’ve found the connections for everything except for 3 wires coming from the fuel rail harness; also, the 2 wires leading to/from the crankshaft sensor don't quite make sense to me yet.



20261020_201544.thumb.jpg.cc0f599ca6ada8ec0cb641e5ccf69b72.jpg


20261020_201547.thumb.jpg.fb37df9c994ef75d29984ae389fe8eac.jpg


20261020_201549.thumb.jpg.31de415ac9da4cbf3ab6cdb79a5ef2d0.jpg


20261020_201556.thumb.jpg.7956c3c1d0324e9cd6ca78c5c25e15ba.jpg


20261020_201605.thumb.jpg.e2186b627bbeb43c94423c515f61a532.jpg
Well, at least I have practically everything there; I just need to figure out where each wire goes and solder everything back together.

That’s exactly what I’ll do once I get a replacement wiring harness.

Last time, I used a bad battery, which made the engine crank very sluggishly. This time, I used a jump starter (booster pack) and—while I was at it—tightened the positive terminal clamp, which had been left unscrewed. To my surprise, the engine cranks over very briskly, which means the starter motor is in good working order. (This was, of course, with the spark plugs removed.) And when I took into account that the installation was cut, it made sense to me that there is no communication with the ECU and the rest (fuel pump, etc.). Although the pump is most likely broken from standing still.

Here's a video of cranking



That's it for now, we'll see little by little.. I found the pump in Italy, the main one and the auxiliary one.. Italy is the main source for parts, they sell a lot of things there.
 
You want to talk to this guy on Facebook, he repairs & refurbishes the TPS plus a lot of other bits as unless you've discovered a hidden goldmine over there, the throttle sensors have been unavailable for a long time

45826.webp
 
He does sell a lot to the continent so it's not as much of an issue as you might think ;)
 
Helloo,lLets write an update
I took the injectors from the Clio to be cleaned; 3 out of 4 were fine, but one was completely dead. The 5th injector—the one used for cold starts—couldn't be revived either.



20261028_205714.thumb.jpg.6d8d9fed28c1e263aa48f715d0d33cd9.jpg


20261028_205724.thumb.jpg.8a9f9ff0dd138f8ad1a78d5167fd90a7.jpg
I remembered that I had bought a fuel rail from an R19 16v for my Mégane, and fortunately, it still had its R19 injectors attached. They’re a different color, but the specifications are identical. I had those cleaned as well, and after quite a few attempts, they were all successfully brought back to life. However, since the R19 rail is physically different, I transferred everything over to the Clio’s rail. I ended up using 3 injectors from the Clio and 1 from the R19—mainly because the plastic atomizing tips on the R19 injectors were in poor condition.



20261105_202159.thumb.jpg.8baaec71296118a0e5808f94b6ce0b1b.jpg


20261114_181403.thumb.jpg.51361a3bf5c9ad34f2da548362f004b0.jpg


20261114_171635.thumb.jpg.bcfeb9c60a2db614426638c6c6ebdc32.jpg
I tried connecting the fuel pump directly to 12V, but it showed no signs of life. I tapped on it to see if it would wake up—and it actually activated, emitted a faint buzzing sound for a few seconds, and then died completely. I checked some auto parts catalogs to see if pumps were available, but then I remembered I had a pump from a Mégane I 1.6 16V. I retrofitted it into the Clio’s pump housing, and it works now. I just need to come up with some kind of filter—a strainer, really—for the pump inlet, since there’s a lot of debris in the fuel tank (likely left behind when the pump was removed previously, or something along those lines).



20261028_205624.thumb.jpg.85f059b0aebdf7040d4875ec480e5fb9.jpg


20261028_205644.thumb.jpg.33d0f8d0c3cb8dae7615ea2caa8daff6.jpg
The fuel lines appear to be disconnected and in bad shape, so I bought about 8–9 meters of new fuel hose to replace everything. This way, I can be sure it’s secure and won’t leak—though I haven’t gotten around to that part of the job yet.

Given that the engine harness was cut in several places, it was not the easiest to determine where to solder what (especially the bundle of wires). In Italy I found a man who sells the harness and a few other things for a really reasonable price and I really have words of praise for that seller, he also gave me the entire installation that goes for the headlights, fog lights, etc.



20261111_205055.thumb.jpg.57c8f33b45e7aba3c59488860b8d9fb9.jpg


20261111_211533.thumb.jpg.443b7c82a0401ead0ba1d4c50bab4ff6.jpg
 
So, I bought: clutch as new used for a few hundred km, front and rear mask ph1, and he gave me 2 relay covers from phase 1 as the car has ph2 cover.I thought I would compare my installation with the new one and solder all the wires that were cut, but I didn't have the patience for that because I wanted to put the installation on the car as soon as possible and try to start it
Cleaned the intake as much as I could, it was really horrible, it's better, but it can be even better.. good for now, and bought a new intake air temp sensor since the old one was broken.
20261114_165530.thumb.jpg.a8cdc264618a5f7fbc6b52a272e46009.jpg


20261114_165609.thumb.jpg.82b3fc746770399916e67d014dabe348.jpg


20261114_165700.thumb.jpg.6d4d405008cf3932ddf06e8d959434fd.jpg


20261114_171615.thumb.jpg.5c50f3c67bb152cd85ecf75e82b21f87.jpg

I removed the hood from the car to get better access to everything. First, I took out the old wiring, then I started cleaning the intake ports—they looked absolutely terrible... I used a brush attachment on a drill, along with WD-40 and brake cleaner, and now it looks significantly better...



20261114_133631.thumb.jpg.17c5a637768b5c158966729c4ff0e977.jpg


20261114_134019.thumb.jpg.3d6c9be1896077c3eb2d6b4fa94293a4.jpg


20261114_143049.thumb.jpg.d46e8adfe6c67e407b56227def7bbe02.jpg
 
After all that, I sprayed down the entire intake ports and poured a mixture of ATF and acetone into the cylinders (again) to help lubricate everything.I cleaned the connectors on the new wiring harness and all the sensors using contact cleaner, then hooked everything up. It took a bit of head-scratching, but since there aren't that many connections, I managed to get it done—though not entirely; I have a few leftover connectors and can't figure out where they’re supposed to go... we’ll see! 🤣



20261114_144620.thumb.jpg.0629d0b4b2c6a9ceaa828c0bd07faa2a.jpg


20261114_144708.thumb.jpg.feff52d96938e1de1245687ae42d394e.jpg


20261114_145110.thumb.jpg.487110d358a29a5a214f09ffc318e850.jpg


20261114_162714.thumb.jpg.d25b669fcc5060968ed43d98ee8d7025.jpg


I bought an intake manifold gasket, but—naturally—it turned out to be for a 16-valve Mégane, not a Clio. So, I just reused the gasket that was already on the cylinder head, adding a bit of silicone where it had started to peel away to ensure a good seal. In any case, this is all just a test to see if the engine is even alive; I can always sort everything out properly later.Installed the throttle body onto the intake. ...and the idle air control valve, and tried fitting it onto the car—but it just wouldn't go on, no matter what. The power steering pump was getting in the way, preventing the intake manifold from seating properly, so I did a bit of grinding on both the intake and the pump—literally just 1 mm—and it fit like a glove.



20261114_181406.thumb.jpg.f102632534590b5ce7b74168c16949ae.jpg

Everything on that engine is such a tight fit that I don’t know how I’d manage to do any work if the radiator, core support, and other parts were in place... there’s literally not a hair’s of space to spare.The exhaust was already unbolted; I took it off, cleaned the flange, and put it back on—now I just need to connect it to the rest of the exhaust system.



20261114_192209.thumb.jpg.94f43eebe123ee53e91c9e895757385e.jpg


20261114_192449.thumb.jpg.4ea5225f17012b5585407d784e8c5e2c.jpg

I screwed everything back into place and pulled out the spark plugs to check for a spark while cranking. I didn't have much faith in the ignition coil, bu behold—a spark appeared, just as if the car were being driven regularly! I put the spark plugs and ignition wires back, sprayed some brake cleaner into the intake, cranked it, and the car started literally instantly—I couldn't believe it...I tried it about 5 or 6 times, and it started every single time; it’s showing signs of life—it wants to run!

There’s no exhaust system, which explains why it sounds the way it does.


And that’s it for now.



20261114_200622.thumb.jpg.c8d3024901592f052e8771d2d6820db7.jpg

Next, I need to connect the exhaust so the car isn't quite so loud when it starts, and I have to run new fuel lines. I also need to check if the fuel pump gets 12V once everything is connected to the original wiring... I’m hoping to get that done this week.
 
Back
Top