Search results

Decent car cover and leave outside. Mine sat idle for 95% of the year like this for several years without issue.

Yeah its sandwiched in between the aircon and rad. And yes uses those connectors. The S3 IC used alloy ends so you can use proper clamps.

Indeed.

Which there obviously was!

Can I ask why you didn't fit new valve seats then if the valves and seals were new? As you never did give me the receipt I asked for with the detailed breakdown of the work carried out.

All new?

Didn't you replace the valves and valve seats for new on cylinder 3 after slipping the timing?

Bar the fact my car idled like crap, had random surge's of power off throttle oh and blew up after 300 miles of being mapped. I put it down to bad luck but seems i'm not the only one who has had engine failure not long after taking a trip down to them this year. Spoke to a really clued up guy...

I wouldn't travel 6 hours just to go to EFI, in fact I wouldn't travel 10 minutes!

No idea, its getting left switched off though.

Its defo a Power Magic Pro, but what its wired in for I don't know. Scared to turn it on, lol.

. Looks to be hardwired for the dashcam. ?

Yeah thought that. Car has been remapped at Shark performance but didn't know they hard wired tuning modules.

Anyone know what this could be hidden away in the top of a storage drop down?

Yeah mate and the fact the air intake temps are off the scale in the weather.

Yeah the S3 intercooler is needed. Its only £300 and a direct bolt in.

Gonna go with what i know in the DS1.11's, DS2500's in the rear. Should stop the barge pretty well.

Something heavy I'd expect.

Yeah bloody expensive at £130 for rear ds2500's. Cant find anything else though.

Answer I was looking for mate ?

Look a little to aggressive for the Clio at neat 0.6 MU. I had the RC8's with similar coefficient and they were terrible. Far to aggressive with little modulation. Saying that the graphs don't always give a true reflection of performance IMO. I was sceptical about the DS1.11 being under 0.5 MU...

The black bushes are 'grease free' but are very common the creak under load. Mine are doing it on the VRS and its annoying. I'm just going to remove the bushes, smooth off the ARB with sandpaper and grease them up. Should work for a while as spraying WD40 on them helped for a day or 2. Also the...

Anyone ran both? Have ran the DS1's but not the DSUNO's which look beastly on the coefficient charts below. Not sure they'd be as kind on discs and last as long as the DS1's though. Currently got DS2500 but had them fade pretty easily on a recent spirited drive out. Pads would only be used on...

Love them. Defo something I'll be owning in the near future. Think I'd go with the AP2 though, but they demand a premium.

The new motor is struggling with these temps. Its feels like a different car at 6am in the morning compared to the afternoon drive home. Forgot how much TC'd cars struggle in these temps. I'd bet there's a 20-30hp differnce. The open cone filter wont help as well.

Really, Jesus bet that's fun in the wet

I really cant see the point in putting 430 ponies through the front wheels. Not read the spec in detail but you'd be needing some serious hardware to keep them contained. More than likely power and torque is dialled back in the first 3 gears. The 3MPS boys do it with there 400-500hp builds, some...

You can sort of see what's going on here... KTEC do a similar one... http://www.k-tecracing.com/show_product.asp?id=2656

The horizontal rear beam bolts into the side seat belt mounts by a m14x110 so nice and deep into the chassis. The front horizontal again bolts deep into the lower seat belt mounting points using an m14, also the front horizontal bolts in 3 places along the floor pan. The single piece loop then...

Can you not get a half cage that bolts into the existing seat belt mounts like the MSV one I had in the Clio? So much easier to fit/remove and easier to sell on...