Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Have you got the wings mate?
Its just i didnt see it mentioned in any of your posts and the bumper and the skirts wont go on if they are offcial renault sport ones as the wing is different at the bottom for the skirts to clip in, and the wings are alot wider for the front bumper to fit right...
When i go under a tunnel or anything like that it has a delay by about 15 seconds to turn on. Its not as soon as its dark they come on.
Try putting your hand over the sensor and see how long it takes for them to come on.
lol
Not long left:
http://cgi.ebay.co.uk/Ann-Summers-Liasons-Babydoll_W0QQitemZ260375649236QQcmdZViewItemQQptZUK_Women_s_Underwear_Design_2?hash=item260375649236&_trksid=p3911.c0.m14&_trkparms=72%3A1683|66%3A4|65%3A12|39%3A1|240%3A1318
:)
2 x 182s
I think the RB one was rich1982 and opposite him there was a silver 182.
There was also a black 172 rep i think which looked mint.
Had sprayed 1.2 badges on the side and has recaros in it. Looked very nice to me. :)
nononono
these: http://www.priracing.com/shopimages/products/normal/studuniversalBIG.jpg
with these: http://www.priracing.com/product.php/928/180/nut---taper-1-2-inch-unf
They might not be the right size as i havnt checked.
Sam!
Could be cheap for someone!
http://cgi.ebay.co.uk/RENUALT-CLIO-SPORT-172-182-EGG-GRATE-FRONT-GRILLE_W0QQitemZ280320891820QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item280320891820&_trksid=p3286.c0.m14&_trkparms=66%3A4|65%3A10|39%3A1|240%3A1318
Thanks, Sam!
The clips are riverted onto the side of the car then the skirts sits on top of the clips!
Iirc, there are about 5-6 self tappers along the botton into the sil which secures it there.
If you want, you could put a bolt/self tapper in either end of the skirt to secure it into the inner wheel arch...
oo nice to hear you got it sorted.
Question though.
what if you have the log nuts with the spinning washer on the outside, which would then stop you from hammering a slightly to big socket over the top of the locking nut as it would just spin surly?
Thanks, Sam!