Search results

I have HC discs on my 182 and Mondeo ST 155 (ASBO upgrade) and never had an issue, sure it isn't your pads leaving deposits?

Try re-bleeding. Does the pedal go hard after a few pump with engine off?

Could be the pads you have on mate, I've just fitted DS3000 and they're similar, not much happens then they bite like nothing I've felt before. What pads are they again you have fitted?

Is this UK based?

Doesn't mention new discs and pads for each weekend in the rules, and tyres should be a minimum of something like 2mm it states. And surly a gearbox rebuild is only required when necessary. Dunno not really looked that far into it TBH.

Not sure they make them 4 pots though, will have a look now.

Defo grabby, got them really hot and they seemed much better. What pads would you recommend next mate?

So after what seems like endless issues with the OE brakes on my FF I've finally managed to fit the B4's from Compbrake I purchased back in Feb, I've coupled these with Ferodo DS3000 pads. At first after fitting they weren't all that but after 50 miles of bedding in they're now great and braking...

Yeah we all know what you drive, what you've driven, where you've driven, how well you drive blah, blah, blah...

The Clio is a track car only, and was purchased as it's probably the best budget track car on the market. So you own "both" rwd, fwd and 4wd then yeah? 😂

You have your preferences I have mine, as for the beating my chest comment this made me literally LOL coming from you. You're the Silverback of chest beating on this forum my friend.

Volvo's interiors are there strong point, especially the seats. I'd love another but just not sure I could justify the cost of them compared to say a 3 series as they're a little wooden to drive in comparison and wrong wheel driven. On the flip side the newer models like the v40/60 look much...

They'll be fine mate, got them on my Mondeo ST155 commuter and they're great.

Will be fine for the M3 mate for everyday driving and very good for wet conditions for a high powered RWD. If you're a B road blaster though forget it as they're not good at all on the limit and just fold over on themselves if really pushed in the dry.

Anybody ever took part in this series? I may be able to get a sponsor from my company for next years races. Seems a pretty decent championship for an amateur?

Got RS3's on my ST155 and they're great in wet conditions not so great in the dry when pushing on as they have very soft side walls even with XL. I'll be fitting a set to my 16" cup wheels once the Pirelli's have worn for wet track days only, as they would just fold over and melt on a dry track.

Cheers Mike, think the above pics are your handy work by the way? Thanks for the inspiration if so as I was about to fork out £50 for custom lines.

Yeah mate just as in the pictures really if you wouldn't mind. Do you have the tubing and male/female m10x1 unions though?

Just cancel as its a rip off anyway even with discount, I've just moved over to BT from Sky. TV platform isn't as user friendly but much cheaper than Sky for fibre, basic TV and BT sport channels. Plus with all the decent android boxes out now you don't even need Sky anymore for Movies, Sport...

gorilla glue for quick fix or a plastic weld on the reverse. http://uk.gorillaglue.com/gorilla-epoxy

Needing some solid brake line extensions for my Compbrake 4 pot kit as the lines they supply are way to long and the OE lines are to short. So just need to get someone to make up 2 x 4-5" length of pipe with double flared ends and m10x1 male and m10x1 female unions attached so I can join the OE...

Not as simple as that mate as its so bloody tight, I had to:- remove drivers wheel remove the arch lining remove the upper inlet pull back the firewall material on the bulkhead undo the 2 flare nuts with 11mm flair spanner undo the 2 10mm bolts for the MC bracket undo the 2 10mm bolts for the...

I feel for you pal I really do. I've had issues with mine recently where I changed everything brake related, hard lines, flexes, MC, ABS pump and it turned out to be the feckin abs rings on the front. My system ran totally empty when changing the above and I used a cheap £5 ezibleed kit and...

That's a good price, where from?

Used r888s here, can normally get a set of eBay in size 195/50/15 for less than £200 with decent tread if you're quick. Never used any other so can't comment on the difference to RSR'S. http://m.ebay.co.uk/itm/4-x-Toyo-R888-195-50-15-Trackday-Drift-tyres-/322077793247?nav=SEARCH

Looks like it's been welded together, it's a ringer 😂

Erm.....

Cheers bud, got a set to fit but tempted to sell them and use RC5+ pads on HC discs....

Just watched it from my email. Wouldn't know how to post it here though. Nice warm up laps...

How come to aggressive?