Search results

I had this with a side light, if i moved the bulb about it would turn on and off it was a dodgy connection to the bulb holder

Is the air bag block the red and black connector? I'm assuming I'll still have to reconnect the pretensioner wires that I cut

Thanks for the detailed reply man, unfortunately I'm up in Edinburgh so a bit far away, thanks for the offer though. I've fitted clubsports as well, really happy with them. As for the wiring, the passenger side does seem quite straight forward, as you say there's only 4 wires to connect, but...

Cheers man, I can give that a go

The were never there in the first place, is this because I have a cup so there's no air bags in the seats, not sure if that makes a difference? Probably worth mentioning that my seat belt warning beep/light worked before i changes the seats and I didn't have any air bag lights

I've seen a fair few posts about this, but I cant seem to find the answer that helps me out. So I put bucket seats in my 172 Cup a couple of weeks ago, but not got round to sorting the wiring out, finally attempted to tackle it at the weekend. I cut the wires to my seats to get them out ( I...

That looks pretty decent, there's a custom exhaust place near me, could probably just ask them to sort it for me. Don't really fancy cutting my bumper though D: Do you know if it has any effect at all on the noise it makes?

Just like the Ktec recessed exhaust rather than the stealth

Has anyone changed the tail pipe on the stealth system? I quite fancy the recessed look with a bumper cut out on my 172 Cup, just wondered if anyone else has done this, and if they did what tail pipe did they use, or was it a custom job? Cheers!

Yeah they were might thoughts Anyone know what the Febi mounts are like out of interest? Do they compare to the OEM ones or are they not worth looking at?

Nah it's not going on track, not any time soon anyways, cheers man

I'm going to change my top right engine mount on my 172 cup soon, as my current one is a little worn now. Just wondering whether to get a Powerflex bush for it or not? Heard they can cause a bit of cabin vibration, I'd rather avoid that if possible. Any suggestions/recommendation? Cheers

Finally got mine in between breaks in the blizzards up here! Still some work to do but it's getting there.

I got the same subframes for mine, sound bloke and high quality product

Looking good man, I didn't realised they'd changed the slots for the harnesses to come through the seat, I preferred the old style of this if I'm honest, something else they've obviously changed for the new seats. Looking forward to getting mine even more now :)

They do a look a bit scuffed. Even if they are a budget seat, I wouldn't expect that from a brand new product.

oh really? I'll give them a go then, can always send them back, cheers man

Looked at both of these and according to the description neither of these will fit my seatbelt tongue, as it's the wrong dimensions, still struggling to find anything. Matt123roll do you know where you got yours or who made them?

Sounds good, I'm getting mine on Friday, I think I'm going to fit the sliders, maybe the side to side movement is something they've improved with the new model?

Getting mine next Friday, took the day off, cant wait for it to rain so I cant fit them XD

Yeah this is the kind of thing I'm looking at, I'm assuming that a bolt through the tunnel is the most secure? It's only temporary so might just buy some of these until I get my harnesses

Yes I did haha, I cant find anything like that with a buckle to extend the length, so just a bit stuck with what to do. I've seen people use a seat belt stalk bolted to the side mount but i didnt know how safe this would be given that the seat is fibre glass

I'm getting my Corbeau Clubsports next week but I'm not getting harnesses just yet, does anyone have a decent solution for running standard seatbelts? Obviously the anchor, buckle clip thing ( i dont what know what the correct term is ) will come out with the standard seats, so I need something...

Nah I was using a socket and a geet big breaker bar. Got one of them out, the other came half out then just got chewed up, ended up having to drill it out. Yup, now stuck with the seat bolt, snapped my T40, bought another one today got it a quarter of the way out and now the Torx head is just...

Never mind turns out I was just being retarded. Traumatised from trying to remove the isofix bolts.

I'm stuck getting the rear seat belts out of my 172 cup. I've unbolted them from next to the rear speaker and taken the plastic trim off above the parcel shelf, but I can't see a way of getting the belt out through the slot in the plastic trim. Am I missing something here, can anyone help? Cheers!

Yeah this is what I was thinking, better for daily use. I've ordered the XL, Roll on March!

34, XL it is! Cheers for that

Might be a daft a question as I guess it depends on the driver, but any body have a preference between the standard and XL seats? Trying to decide which to get. Obviously width of the seat will depend on if you can fit in it or not, but more thinking of comfort in general, don't wanna be...

I might try taking off a small piece and re do it, re re clean, re sand etc, see if that gets rid of anything remaining on the dash. Really dont want to take my dashboard out again D: