Search results

I've just applied carbon collective platinum wheels on my refurbed tuirines I've put 2 coats outside and the inside of the wheel, the sealant bottle is 15ml and I've used around a 1/4 of a bottle, is this about right? I feel as if I've not used enough product? How much have others used that...

What can I use to clean the diamond badge on the centre caps of wheels? The silver has gone tarnished, I've tried APC and no luck will a AIO polish do the trick or will I need something with a bit extra cut? thanks

When the car is started there is a ticking sound coming from engine bay on passengers side. i think I've located it to the adjustor motor as the unit on the back if the headlight is vibrating, will the motor be goosed? Just to add while the adjustor motor is clicking the headlight doesn't...

the inside pads on the front brakes aren't making even contact with the discs, about 60% of the discs surface is covered in corrosion! They dont squeal either or make any noise what can cause this problem? They are cheap feodo sl pads and discs. They have covered approx 4000 mile Thanks

I've read on here that the long term fuel trim should be around 128 is this true? I had a ema light on so plugged rs tuner and it came up with front 02 sensor I observed the love data and it said long term fuel trim 146 fitted a brand new lambda sensor and no ema light and nothing present on...

What are the brake nipples like on a 182? My cars done 89k? Will they come off ok or do they tend to snap? Thanks

Hello there I'm getting the rear joint removed from the cat on my 182 and getting it sleeved to fit my piper catback system, a fabrication company will be doing it and I'm just taking the cat in for them to do, my question is how long will the new stainless steel sleeve have to be to connect...

Can anyone confirm that this ball joint will fit my 182 FF? Don't want to order it then come to fit and its the wrong part etc?..... I have entered my reg so it should fit however ive had parts from ecp before and they haven't been right...

The 2 10mm nuts are both rounded that hold the fuel rail guard on. :( any idea how I can get them off? There is next to no room either. Thanks

While removing front bumper I snapped both bolts that hold the bottom of the bumper to the car, how important were these? Will I be able to fit the bumper safely and securely with out these bolts? Thanks

Hi there the lights and inside of passenger side headlight are loose and wobble about just wondering if anyone knows what the problem could be? Here a couple of pics to help explain the problem first picture is drivers side and is fine(take note of actual headlight and where it sits height...

hi there my passenger side xenon dipped beam is flickering on and off sometimes, sometimes itl completly go out, sometimes its fine, also it isnt as bright as the drivers side and also looks as if its either sitting higher or lower than the drivers side whilst driving in the dark theres a gap on...

Will any sleeved decat fit my 182 piper catback? Thanks

Hi there just fitted a brand new piper cat back system all the exhaust mounts are fine however the tail pipes don't fit inside the bumper cut outs centrally, they are mm's away from touching the bumper cut outa on the left hand side and need to be moved about a cm or so right so they fit...

Plugged rs tuner into car and this fault is in its memory and also present, i erase and then refresh and its still present however the eml does go off for around about 20 mile and then returns. The name of the fault is: rear 02 heater fault on activation. Is this the post cat lamba? Or something...

Before i start don't slate me! I'm not some chav whos going to be flat out down the Main Street popping and banging all night once i get it mapped lol, simple question really what are the cons from it? I presume to get the actual pops its over fuelling? Can this cause stress to engine...

Blue 182 with turnies in club car park 5.15?

took forever to upload pic from photobucket so carnt be done with doing it again so here the link to my thread on detailing world :) http://www.detailingworld.co.uk/forum/showthread.php?t=308147

I've noticed on both cv boots there isnt a cir clip keeping it on only a cable tie :/ is this normal or do you think they've had the boots off packed with grease and then used a cable tie instead or cir clip? This is on the side closest to the wheel, also there is a small amount of grease...

which product do people recomend between carpro flyby30 and gtechniq g1 for glass? and also what for exterier plastics? carpro Dlux or gtechniq c4? cheers

kurbed a alloy today as you can tell by the pictures not deep just scuffed and paint has been removed, is there any options other than a wheel refurb? ive seen this on ebay is this a correct match and worth ago even if itl just paint over the scuff at least it wont look as bad? cheers...

Bought a 2nd hand scorpion decat came with a new rear 2 bolt clamp for the olive joint so i then bought a genuine manifold to cat fitting kit, problem is the new gasket that came in fitting kit wont fit inside the flange of the decat and is a fair bit bigger however it sits nicely into the...

no branding just the colour on the spring and this 1 is branded kyb and looks newer/in better condtion than the 1 on the opposite side any help would be greatly apprieated

if anyone could let me know if i have fitted this correctly cheers

once the car has been started up and moved then turned off or then driven for any duration of time, when i go to lock it, it beeps twice. dosent always do it if i then unlock it then open and shut door and lock again it dosent make the beeping sound? any ideas anyone? cheers

ive done a search and carnt find what im looking for, im going to be replacing 1 of the rear exhaust mounts and also the centre section mount as they are buggered i take it ill have to remove the back box and just wondering if its possible without having to cut it? its a motorfactor standard...

Where the handbrake fits onto the calliper it has snapped off as a result the handbrake it crap lol on the other side it's fine and still connected, also where the cable has snapped the thing on the calliper that locks the brakes when the handbrake is on has seized... Any ideas to get it...

Tried to do a oil change today came to remove the fuel rail guard then struck the problem, the 2 10mm nuts have both been rounded so how am I going to get them off and get access to the oil filter? Cheers

what are peoples views on there products, or what other brands do you recomend cheers

I'm going to be changing rear pads and discs so I'm wondering if ill need new hub nuts aswell or will the old ones still be ok? Cheers