Search results

Buy a dremel. Lots of sandpaper wheels and polishing heads. And a lot of man hours.

466 - second guess

284

Alarm has been going off again. ultrasonics according to the three led flashes. anyone know which wires i swap over too turn the sensitivity down to 20% instead of 805? ive read its red and white. but where are they? ive got them pointing straight at the apillars know just to stop them setting...

Sure fuel line and trottle body plug are connected?

Id start with checking you engine earth point mate.

Nope nothing mate. Just the hub nut and two lower arm bolts to take off.

Id go oem if on standard springs still.

One nut and one bolt mate. With car on the floor looses nut under the rubber hat in the boot. Jack car up, axle stand. Put jack under the beam to take the weight. Remove bolt. Remove nut you have loosened. Out, new one in. Bolt in, nut on. Lower car. Tighten nut and bolt. Should take you half...

Damper?

488 second guess

Only thing they should be touching is the track rods. So have a look there. As tracking is only toe adjustment.

Sat like this. And now they are spot on.

Wherr did you get the mounts from? I had the same issue. Swapped the new rubber mount to old ones still using new bearing and it sorted it. I used motor factors. Might be the same fix.

What happens when you operate the rear one? If it works as normal id say the rubber bung inside the pump has stuck. Either take it apart and cut it down so it slides. Or replace the pump.

475

Reg M88 ARV. Spotted about half 7 on the bridge. Looked pretty tidy.

http://www.ebay.co.uk/itm/130858146293

K&M motors in wantage lol. Ended up using Marcham Services.

Tank of vpower today. 148.9 i think it was.

Got them all fitted. £52.80. Told me to keep the too rear ones as spare. As they still have loads left. Which i knew about, just wanted to do all four. May sell them on ebay to make some dosh back.

Just been quoted £12 each corner. He seemed abit iffy when i said they are 195 45. Said ooh last time i did a low profile my machine slipped. Are the wheels on your car new? FLOL. Aint going there in a hurry.

Ok cheers guys. I got a mate who works in this place, i asked of he was in and they said yeah. But i already have a quote from them. Yeah was 16 plus an extra quid to get rid of the old ones. On place wanted £19 each corner. Lol. Ill keep ringing around, national tyres and ats wouldnt do it...

Whats an avrrage decent price for fitting tyres? My camskill order arrived this morning but my local place wants £16 to fit each tyre ans balance. So £64! Pricey??

Id spray some white grease instead of wd40. Go mental on all the bushes one by one. See how it goes.

Seen this car in person. Mint!!

Need new exhaust hangers too. The two tailpipes are sat differently. Apart from.that it looks ok to me. Sorry cant view it. Just what i noticed.

Lol, took long. Abit more of a bang and went in. Doh!

Will give it another go mate. Pretty sure they are sat right though. Love the handbrake cover too. Also on my list

Right wanker fitting apillars. Mine still arent on correctly. Not clipping in at the top nearest the windscreen. Ant tips? Isnt just these ones, tried refitting standards and same issue.