ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. O

    Setting ride height for 182 street / track

    Really need to set the height guys have alignment booked in a couple of days I have just put Pure Motorsport Top Mounts in and I think that has messed with my ride height which was never perfect to begin with. I have the front set 32mm from the tire to the guard and rear is 16mm tire to the...
  2. O

    Setting up Clio Height Recommendations

    Really need to set the height guys have alignment booked in a couple of days I have just put Pure Motorsport Top Mounts in and I think that has messed with my ride height which was never perfect to begin with. I have the front set 32mm from the tire to the guard and rear is 16mm tire to the...
  3. O

    Setting up Clio Height Recommendations

    Hi Guys I run Gaz gold coil overs with the standard gaz gold spings i think - anyone know what rate they are? anyone know what a good upgrade on these would be for strip and track day duties? im running 195-50-15 and in the past have had the front rub, now the front is raised im thinking this...
  4. O

    Can you fit 225-50-15's on a 182 Cup??????

    Hi Guys I just got a pair of 225-50-15 Yokohama AD050's and was thinking of fitting them to the front end for track days. will run just a 195 on the rear as thats always been tight with my rims (OZ racing Superlegeras) I also have a set of standard Clio 15" rims if that offset will work better...
  5. O

    Starter Motor Not Cranking (Intermittent)

    I have same issue. happened after a track day, during a track day and yesterday after a drive. did nothing just kept trying to start it and when about to give up, think 5 min it just starts but this is a bit of a worry. Any ideas folks? everything looks right ? is it a starter or crank sensor?
  6. O

    ITB's with or without Cams - Daily Budget Build Australia

    ok sorry total noob, does the timing need to be set while the car is tuned or will my renault mechanic be able to install them with the correct timing then take the car to a dyno tune place to do the tune if that makes sense
  7. O

    ITB's with or without Cams - Daily Budget Build Australia

    Cheers Bloke! - What do you mean by timed well, shouldnt they just be set to standard timing? Or you talking tuned well with ignition timing?
  8. O

    ITB's with or without Cams - Daily Budget Build Australia

    197 worth putting in if I dont require belt change - should have a year or 2 left? 438's are the cams of choice for ITBs or is there other choices I should be looking at? Whats the cost of a set 2nd hand in the UK usually go for as I cant justify Ktec prices ? Thanks for your help guys
  9. O

    ITB's with or without Cams - Daily Budget Build Australia

    I agree but cams are 500 pounds from ktec, can't find any locally second Hand, plus another chunk of coin to have them fitted, how much do a set go for second hand in UK? Or is there some where cheaper to find them?
  10. O

    ITB's with or without Cams - Daily Budget Build Australia

    Hey Guys I have the Ktec ITB and Computer kit that im about to install on my 182 here in Australia but have a couple of questions. 1- Im on a budget, but is there any point installing the kit without cam upgrades as i want to see big benefits! 2 - What cams do I need and can you provide a link...
  11. O

    Ancillary Belt Rubbing on Tensioner after changing alternator and ancillary belt

    I cant feel a groove but it defiantly touches ever so slightly, is it possible to move the alternator up therefore making the belt tighter but away from the tensioner. Its 100% not loose but as far as i can tell the job is doesn't require you to position the alternator in a special way, the...
  12. O

    Ancillary Belt Rubbing on Tensioner after changing alternator and ancillary belt

    Hi Guys I know this has come up before but not quite sure if this as serious as others or nothing to worry about I changed my alternator and changed my ancillary belt with the pikey Jubilee Clip Method. I have now driven around 100 miles and have noticed the belt has just slightly been...
  13. O

    Daves 182 F1 Cup from Australia

    Hey Guys I'm currently in Grays (Essex) for the next couple of weeks, if any one is up for a cruise / catch up I am keen, cars in Australia obviously but I assure you I'll make a great passenger. Cheers David
  14. O

    Daves 182 F1 Cup from Australia

    Hey Guys I thought I would start a members ride thread for my 3rd Clio, This one is a 2005 182 F1 Cup: I have added quite a lot of Mods: Engine: JMS RS2 Carbon Fibre Manifold Polished throttle body Piper Cross Air Filter and larger air feed KTR Upgraded Semi Solid Engine Mounts Urethane...
  15. O

    Cleaning air/panel filters

    i just cleaned it with warm soapy water, looks brand new then re oiled with k & N oil spray.
  16. O

    Best Exhaust to Run with JMS RS2 Manifold

    Hey Guys I am looking at getting a BTM exhaust to run with my RS2 Manifold, would this be the best exhaust to run with the manifold in regards to Power / quietness? Need to keep the car quiet as some race tracks in Australia monitor exhaust levels also the car is used as a daily driver...
  17. O

    Cleaning air/panel filters

    after I cleaned mine and it dried i found if i banged the filter on a bench little black particles will fall out of it, does this mean its stuffed? maybe only had it for 20k and washed it once. Also im using K&N oil spray for it, thoughts?
  18. O

    Lets see your wheels

    Re: SHOW US YOUR WHEELS !!! (no turinis or stds ) Lets see something different !! how the hell do you guys all get your Clios so dam low, my rear GAZ are on there lowest settings and the front are as low are possible and even like this the front tires rub over large bumps occasionally and I...
  19. O

    Lets see your wheels

    Re: SHOW US YOUR WHEELS !!! (no turinis or stds ) Lets see something different !! BBS Replicas on my 1st 172 BBS Replicas on my 182 Volk ce28 on my 2nd 172 Rota Slipstream Current Setup WedsSport SA-97F
  20. O

    FRB 182 F1 Cup all the way from Australia

    The inlet manifold totally changed the characteristics of the car, it makes power so much more smoother and a lot more bottom end. I can easily overtake cars at 80kph while being in 5th gear and even take off sometimes in 2nd accidentally and only really realize when I go to change to 2nd! Now...
  21. O

    FRB 182 F1 Cup all the way from Australia

    I know right, and the exhaust is starting to crack in multiple places - Thanks Renault awesome work! Will be getting new system shortly.
  22. O

    FRB 182 F1 Cup all the way from Australia

    ​Latest Mod:
  23. O

    FRB 182 F1 Cup all the way from Australia

    Hey Guys I thought I would start a members ride thread for my 3rd Clio, This one is a 2005 182 F1 Cup: I have added quite a lot of Mods: Engine: JMS RS2 Carbon Fibre Manifold Polished throttle body Piper Cross Air Filter and larger air feed KTR Upgraded Semi Solid Engine Mounts Urethane...
  24. O

    Cams wanted for my RS2'd Clio 182

    sorry could some one please explain that as I know alot of the guys in oz have blue fin chips which is basically a remap ? I thought Megs would be very easy to gain more poke with more boost & tuning etc.
  25. O

    Cams wanted for my RS2'd Clio 182

    Can you tune turbo 225's and 250 / 265 and I assume 197's / 200 too right?
  26. O

    Cams wanted for my RS2'd Clio 182

    the link doesnt work, whats the site called?
  27. O

    Cams wanted for my RS2'd Clio 182

    there has been an update I someone to tune the car at a much better price so who can help me out with a set of 197 cams ? I can arrrange to have them shipped to a freight forwarder and then have them shipped to me so. Also need to get options on the exhaust
  28. O

    Cams wanted for my RS2'd Clio 182

    Cheers for the comments guys, so it seems as I thought best bang for buck would be to obtain some 197 cams, if any one wants to ship a set to Melbourne I will gladly pay all the costs for your time and effort. I may still bite the bullet and then get the car properly mapped or even see how much...
Top