Search results

What are people's thoughts on the piper?I've been looking at this but don't want it to be too loud

Hi guys, My RS192 is blowing at the decat to centre joint and is a bit annoying. Now I was looking at going down the sleeving option, but after doing some searching I found the pipe before the silencer is 2inch and then steps up to a 2.5inch through the box or just after so I can't get it...

I've got a set on my car and again I barely notice any vibrations apart from a little noisier on idle but even then it's not even that bad. Are the mounts brand new? Cause I'm sure they will make a bit more noise to start with, when I fitted a brand new set on a previous car they made a right...

549 second guess

625

If your drive shaft still hasn't arrived, you could always just get the oe oil off eBay Elf Tranself NFJ 75w80. That's what I ordered for mine, it was £29 inc delivery for 3 1L bottles and arrived the next day, just make sure you order in the morning, I ordered like 9am on the tues and it...

lol yer I know, comes with the package of owning a Saxo doesn't it haha. I was trying to get him to come in his clio 197 but he couldn't be bothered since its standard and he knows it won't make book figure lol so the Saxo it was. Ive just sent the deposit over Matt :)

A mate of mine wants to join in too. He'll be in a saxo as to whether it'll be modded is a different story. Hes only just bought it as his xsi blew up on donnington lol. So this will be his new track toy eventually. Matt ill be sending his deposit over ill do it tomorrow morning for you :)

522

payment sent pal :)

That's great thanks guys, I'd read about the knocking actually but none really said best way to avoid it. In regards to loosening the mounts do I need to loosen the one that goes between the bottom of the gearbox and subframe aswell? The one it rests on. Sounds simple enough though, may get...

Hi Guys, I'm looking to fit my engine mounts this weekend. I know how to fit the mounts, but when I did some searching I seen a few people on here mention about if they're fitted 'correctly' they won't vibrate as much? Now I'm not overly bothered about vibration as I had vibratechnics...

ok thats great, ill take a look into them high temp sealants then :) so as you say with the sealant, will that be the same case with the finishkare 1000p or c.quartz dlux? apply that first then wax? thanks

Yer thats not too bad, im just thinking incase i leave mine over night i wont be able to monitor the jack and see if it sags at all. Any more ideas/opinions or pics guys? Im still undecided lol

Ahh ok fair enough, how long did you leave it stood like that for?

ok that's great, thanks mate :) What did you secure your engine with whilst you sprayed it? And how long did you leave it for? That's my biggest worry is leaving the car with the engine being supported for a few days lol. Was hoping I could find a spare bracket for the mount so I could spray...

That's wicked thanks gally. I may apply with a hand applicator then to keep heat down, just to be safe. Don't want to risk ruining it lol. Ok I'll go with that then on the wax, I mean I do also have dodo juice diamond white I think it is for later colours and its a hard wax. But wasn't sure if...

I was guna say they don't look too bad at all in the pics, especially now considering you was a bit drunk haha Although I bet it's a different story up close? :p Yer that's what I'm worried with if I went for stainless bolts. They just stand out too much, so I was tempted to get new standard...

I like how you've done yours. The engine mount looks good :) I was a bit unsure of doing the cam covers all silver because of spraying the face of the head silver, thought it may be too much silver lol Did you spray the mount? And are they new bolts you used? It looks like a Matte black...

Hi guys Just got myself a RS2 inlet :) Before I fit it (can't wait), I thought I'd give it a tidy up and give the carbon a bit of a polish. But I am unsure of what polish would be best to use, also would you wax it after and what wax would you use? I have a small collection of polishes...

Ktec or Dan at 519automotive would probably be your best bet. Or a 2nd hand one if you can find one, they pop up from time to time. Thinking about it if I remember right, eBay and vibratechnics themselves and the above are all within a couple of quid of each other on price. So doesn't really...

212

Usually about 15-20 mins a car isn't it? Should be a good turn out by the looks of it

Hi guys Wasnt sure if this was the right section or not, but here's goes anyway lol I'm in need of some pics and opinions of what people have done when painting there cam covers. Ive recently bought an RS2 inlet so looking to tidy up my cam cover and head etc now it's all going to be exposed...

Ahh 9.30 isn't too bad then, what sort of time do they usually start the runs? Or is it rock up at 9.30 an they get the car straight on? Nowt wrong with being a tad late though ;) The last RR meet I went to was in Loughborough and because of where it was situated he wasn't allowed to start...

B**tard, you beat me to it Adam lol

1) mharvey - either date (may not be running) 2) Martin182 - either date 3) 1812lsd - either date 4) DaveDreads - either date (as long as it's still working) 5) Tr1umph - either date 6) Madgit (Adam) - either date 7 Addicted - either date 8) Dan@M.A.D - Not sure if i can make the 9th 9) Chris.C...

I best start being nice to the manager now I think, I'll ask him tomorrow if he can switch Saturdays with me, like I say can't see it being too much of a problem, will let you know if I can't make it. But keep me down for it still for the 16th :) May even have the rs2 inlet fitted by then :D...

Hmmm interesting, I just happen to be in Birmingham that day working, luckily only till 1pm. May have to go in the Clio to work and stop off here of it all goes to plan, since the branch is like 1 mile away. Will be my first Cliosport meet too lol :) Just got to double check a couple of...

1) mharvey - either date (may not be running) 2) Martin182 - either date 3) 1812lsd - either date 4) DaveDreads - either date (as long as it's still working) 5) Tr1umph - either date 6) Madgit (Adam) - either date 7 Addicted - either date 8) Dan@M.A.D - Not sure if i can make the 9th 9) Chris.C...