Search results

Im going to remove the PAS from my valver, but my 1.2 had a manual rack and it was hard work at low speed. Can i use an electric rack from a diesel mk2, car has no ABS as its a ph1, so wouldnt be able to link it to the ABS unit for viariable assist, can i get away with just using the rack...

hi all To hybrid my valver i know i need an F7R bottom end or a complete williams or F7R magane engine. Can i use another renault 2ltr bottom end from a laguna 2.0 8v? or is this completely different, Im thinking it is but just checking the obvious. Would ask on williamsclio, but i cant seem...

had a friends set of 18's kicking about so whilst fitting my decat and realigning my exhaust i put them on.... for 5 minuites.

Hi Stripped my valver out and had to unplug a few connectors to remove the dash but i was left with these lose conectors when i put everything back together. there is no obvious connectors to plug into!? this one on the drivers side: This one below the guages: And these two...

How many does a Ph1 have? I have always been told they have 1.

Im sure I have a front O/S wheel bearing going but had a MOT the other day and told them about it but they couldnt find anything wrong... at all. its only when i turn left at speed of sharply, sounds just like a bearing, harder you turn the louder it gets. started a month ago. any other ideas...

i was just leaving my Gf's flat and pulling out the road when the stearing went really stiff and starting making squeeking and banging noises, but the resistance was intermitant, i.e stiff then jolting back against my turn, but only does it when i turn. there is fluid in the system and i have...

Ive had my clio a year today, and what an eventful year it has been, got through 3 pairs of tyres, done just over 15k, and spent about £950 on repaires, passed the Mot with just a numberplate bulb needed and a CV gatior clip that had broke. see french cars arnt that bad. had 'one of those'...

registered 11.06.92, is this car pre cat? nathan

hi Am after some new parts for my clio, went to renault and laughed myself out the door. Am after new rear disks and pads as mine are down to the metal and mot on wednesday, im i correct as euro car parts want: rear disks each: £12.06 rear pads each: £13.10 So thats £51.32 for rear...

Seen this and it seems like a good price. looks loud too, anyone had any experience with them, seems similar to a YS race system. http://cgi.ebay.co.uk/OMP-INOX-Motorsport-Exhaust-RENAULT-CLIO-MK2-172-CUP_W0QQitemZ330080758012QQihZ014QQcategoryZ10410QQrdZ1QQcmdZViewItem?hash=item330080758012...

Dont all laugh at once. Would this type of system work, its just a simple drawing i put together to simplify my idea, I am looking into supercharging and have read alot of stuff and other poeples projects on other forums and found this to be the most efficent setup. The engine i have in mind...

Picked this up on friday night from joshydee, well happy with it, Its a complete dog but its strait and has a few more months MOT left in it but no tax, going to be a track car with a difference, edde mite remember a conversation a while ago and will probably remember what myself and Danny-ACE...

how do i find out if a car has been declared sorn? reg is J231 OCK if anyone can find out? thanks nathan

How do i go about scraping a car, take it all i need to do is take the car to the scrap yard with the V5 and ask them to scrap it, thry sign the V5 and i send it off to the DVLA, job done? nathan

Real life comparison, both cars are 2 up. and in the same gear every 'Race'. http://www.youtube.com/watch?v=0idpPiH_qww nathan

do they work off vacume or boost to open? thanks Nathan

Anyone built one? Seriously thinking about building one over the summer as a little project, got a few ideas on how to make it work, but just wondered if anyone here or on the continent has built one. Think it will be a really cool and rewarding car to build. good place for people to give me...

I know the cup has a wider track than a 172 but what is it that makes it wider, wishbones or just wheel offset? nathan

Couple of friends and I took a few photos this evening: 306 is on AVO coilovers and really shows just how laughable my clios ride hight is. The Rover was a 214 but has a 160bhp 1.8 VVc K-seires engine. camera is Kodak Easyshare Z650 on a tripod, new camera so just getting used to it.

can a Yozzasport YS018 exhasut system fit an RS1, im thinking yes. can it alos be cut into the bumper and fit in a 182 exhaust trim? thanks nathan

Hey all My Friends have been pestering me to post on cliosport about this for a while, so hear goes. A while ago a group of us decided to build a website for performance cars and modifying, it kinda started out as a bit of a laugh but kind of ended up quite serious, Any hows the website is...

i heard that garages can carry out a free brake check if you ask? is it true and what would they check?

hi. nathan

My computer keep reseting itself nearly everytime i start the car, so i loose my average MPG, trip2 etc, really annoying. im not accidently pressing any buttons it just resets? help

long awaited, but its finaly done. nathan read post as i ve deleted it, repost in a bit

I have a problem... i want my car to look standard and dont particuarly want to make it lower as i do love the cars stants, but i want the versitility of adjustable suspension (had adj's on my mk1) could i keep the standard springs but still use adjustable dampers? i assume that its ok to do so...

mine is worn to buggary, do renault sell 'new wheels' and how much? I work anti social hours so wouldnt have a chance to check, help would be much apreciated nathan

did a search but cant find it. Just need to know if this car (L78 NEG) is 1400cc and white. if not what is it? cheers nathan

hi all What camera setups does anyone have and whats the picture quality of there bullet cam like? I recently purchaced a 480line bullet cam, mic, wires and suction cups for £164 delivered, was a bit of an impulse buy :o I already have a JVC GZ-MG20EK HDD camcorder and i hope/believe the...