Search results

hi all when i pull off from a stand still, just normal driving, i get this faint clunking sound from my drivers side, when i also lift off it clunks sometimes, i have had a leaking CV joint gaiter which i then tightened up, and do wonder if its a mullered CV joint. but when i do over bumpy...

I Have had to order some new disks and pads after my litttle fiasco with a sized calliper carrier and instead of buying some standard disks and pads i decided to get some uprated ones. Now the way i drive, standard brakes will do me fine so anything better is a bonus, so as a spur of the moment...

just a bit of micky take video for my friends i put together: http://media.putfile.com/pc-97

Where do i start, well i started to get this clicking noise on my drivers side when i pull off, so the other day i took the wheel off and noticed the outer driveshaft gaiter was loose and grease had splatted eveywhere, so im guessing i will need a new CV joint as dirt must have got in. Next...

My first ever Windows movie maker vid: http://media.putfile.com/clio-16vs nathan its 3.31 mins long and the quality isnt the best as i compressed the file a bit too much.

looking for one. can i use the k-tec one for the ph2 and just screw a bolt into the second lamba sensor to block it off, or is there a company that sells them. nathan

would you pay for a mk1 172 inlet manifold? (both parts) second hand? nathan

My friends and I had a little photoshoot the other day as the weather was so good, hear are the fruits of our labour: coments welcome. nathan

taken in different places i know but the car has changed. before after

Really starting to get on my nerves now, wont stop going off, went to renault but was basicly told it could range from £30 to hundreds to sort out, all i asked was for a tec to look at it and give me his opinion... but i would need to book the car in and pay about £30 for someone to 'look' at...

looking at a one of these from 2modified but which one do i buy? one says 'CLIO RS 2000 16v' an the other 'CLIO RS 2000L 16v' ones £158 and the other £161, whats the difference? thanks, nathan

The b*****d thing keeps going off for no reason, help, is there any way i can make it not as sensitive? nathan

hi I have a ph1 and have heard/seen a few with a shift light in the dials but im sure ph1's never had them, do i need correcting? nathan

thanks to all the people that have bought parts and people waiting for parts to be sprayed and delivered i will get them done asap. and a cheeky phQuick 172 pic ;)

Is £100 fited and ballanced good for 2 michelin pilot exaltos PE2's? probably posted in wrongs section, but someone needs to keep the mods working ;)

'I wont modify this one' when i bought my ph 1 172.... but kinda changed my mind. my exhaust is on the way out so im considering a K-tec stealth and there silenced decat pipe, but would i be better going to a custom exhaust fabricator than buying an off the shelf system, i will still buy a de...

drivers side part of the bumper has a bigger gap between the plastic grill and the bumper that overlaps onto it, bumper lines up with the wings and headlights are the same but the bumper either sticks out more or r the plastic grill behind it is further in than the other side? havnt hit it, but...

My 172, my 'old mans' Vantage and my cousins 'M'330d

Im happy with my 172's standard sterio but would like the extra depth a sub gives music, so is there any way i can give my strandard sterio more bass, dont want to chav it out, been there done that, but just was extra bass. is there any way i can hook up a 8" sub to the standard sterio. I was...

hi Im looking at getting one next month as my standard exhaust is blowing a ratting. im also considering a k-tec decat at the same time, theres is silenced, will i notice an increace in noise over the stealth. Also is the stealth fairly quiet at 70mph with and without the decat? chaars...

has a GTT engine, F2 kit and 18"s

my old clio has no MOT, tax or insurance and i need to remove my private plate to put on my 172, im i right in thinking if i scrap the car i can then have the plate removed and transfered, Not worth MOTing it as its fooked. nathan

I have a ph1 172 and after flicking through some threads on exhausts i came across a pic of fUbArs prospeed. wow looks amazing and suits the car so much. just wanted to know how much and what does it sound like? Alos manifold wise would a 182 mani fit to my existing pipework or will i need...

hi My car is quite noisy on idle, whuring sounds, is this normal? Idle is a little lumpy and aslo lumpy when holding revs in nutral, again is this normal? On inspection to find out what the noises were i found what seemed to be one of the radiator brackets, L-shaped piece of metal with a...

Had my 172 mk1 for about 3 days and have an average of 31.5 mpg. does that sound reasonable, put my foot down a few times too. nathan

I am now officailly a member!!! as some of you know i was looking for a Rs-1 (with throttle cable :p) but struggled to find a standard one. well here she is, with FSH, 52k on the clock, and in excellent condition for an Xreg, Interior is spotless too with the mandatory worn steering wheel...

has anyone got the tv add for this, with that fit french woman pouring a jug of water saying 'two litres, into one clio'. nathan

do they always wear really badly, how much is a new one from renault? chaaars nathan

Between a mk1 172 and a mk2 172, bar the bodywork? just wondering.