Search results

:)

^^ Lol! Big Effort, he said photoshop not paint :o

Found it in Visi :) R325 Passenger Compartment/After-Market Alarm Wiring Connection. Pin 1 - from Pin 29 (Green Connector UCH) Pin 2 - from Pin 15 (Brown Connector UCH) Pin 3 - from Fuse Box S7 15A Pin 4 - Ground Pin 5 - from Fuse Box S29 20A With 5 being the red wire and 1 being green :o...

After removing my upper and lower dash I found this connector Wire Colours are : Red - Brown/Black - Yellow/Brown - Brown - Green. This connector was attached to back of my glovebox. I have Extreme 4 so not very well equipped, this could be an add on? I'm unsure, I tried to route wires...

I'd have had them at that price ha shame I already have some.

Dash strips @£25 with a few mins to go

I've got some with 98k think they're ph2 non-sport, and to find some with that mileage would be easy I reckon :)

Give it a bash yourself I'm sure you can do it :) or find a spare set of dials then have a go.

http://www.ebay.co.uk/sch/sue9652/m.html?hash=item19d52e3c06&item=110950759430&pt=UK_HeathBeauty_BathShowCons_RL&rt=nc&_trksid=p4340.l2562 They are going pretty cheap friend asked to put them on here

Turn the unit over an pry out the cover where is pivots upon. I think it's a 36mm festoon :)

Hold the ADAC button then turn ignition :) http://www.cliosport.net/forum/showthread.php?109201-The-Clio-Mk2-fault-finding-dashboard-trick Took me a while to find it :)

Holla as in, what he said :) Hi :o

Gotta love Tokyo Drift.

Battery breather pipe nothing to worry about.

Holla

If you have a multi meter put it in continuity test and bridge across the smds n bear in mind some of the smd will be run in parallel and series so may appear dimmer hope it'll help you find the issue :-)

Yea you can if you two plugs at the back you can replace the bulbs but will need to remove the filter or sand down the orange filter so it should diffuse the light better. The bulbs are T5 wedge capleas bulbs aka dashboard leds plus your best getting a wide angle led to diffuse it better again...

I have changed out all of the interior lights to match a Sony HU for the heater panel search for dashboard leds they are a capless T5 wedge inside a bulb holder. There are 2 of these in the back of the unit but there is a filter that'll need to be removed for you to change the colour. With it...

They should be PLCC-2 3528 SMDs that'll narrow your search :D They should be similar to these - http://www.crazyleds.co.uk/1-x-Orange-PLCC-2-3528-SMD..html

Hoping that you noted the notches in the corner from the old SMD :) If so then try tinning both the PCB then the leg of the SMD then it's a much easier joint to solder so not much heat is excessive on either part. Try after soldering each SMD to check by either attaching it to your car or to...

You can retrofit cruise to a dci, so taping them out the way won't do any harm.

I'll have a quick guess at this, that maybe your clutch switch connector and a bundle of wires may have a white connector with 5 wires this will be your cruise control wiring.

Was sat in my car as he walked past from the Chiquito/Cineworld side. The village gym is nice too. If he was driving to the Village that would be hilarious.

He was dressed is his usual attire (like a mong), unfortunate about the Clio though :) l couldn't think of anywhere else to put other than media :o

Just spotted him at Ashton Moss his missus is rather young. Spotted his Bentley Yeah I know big claim to fame :o A few weeks earlier saw him driving a fiesta 04 plate.

Many maybe asking, is this possible to retrofit just the steering wheels control. As by changing the squib. I have a 2005 1.2 16V and I have a clutch switch too, but not wires for cruise switches in dash dimming panel. RoYa (above) managed CC on a non sport is this because of differing models...

Looks like he's trying to run COD2 :D

I guessing the actual glovebox door is split in 2 halves then plastic welded, so to sort the handle split the door in 2 risking breaking it.

Must be uber POV:p, or it must just be a ph1 thing. It'll be a job routing wires from the back of the head unit. If you even have a block there but not the same I'd look for what colour wires come out from the head unit e.g grey/purple. Then try to match them up then you could test them by...