Search results

searched and searched didnt get 100% asnwer :-) I've got a 1996 1.7 clio Mk1 Diesel here. if i went into tesco and brought 30 liters of sunflower oil. fliterd it and mixed the 30 liters of sunflower oil with 3liters of Diesel ( strate outa a normal petrol station ) can this just go strate into...

Got my lil mk1 Project thats on a 93 plate so it has to have a cat. (bare shell atm ) If i get a 90 donnar car. and change all the vin plates / number plates / chassis numbers.. so making the 93 a 90 so it doesnt need a cat for its mot. or is this just completely illegal :-) or does the...

:-) going to the extreme when stripping my mk1 ph1 Clio ( you may have seen my project thread ;) ) Just wondering if any one has any ideas of ANY thing no matter how small that can be removed. i'm not botherd if it removes Kg's or gram's. as long as it can be safely removed and not needed :-)...

Whats the easiest way to remove underseal and seam sealer :-( been using a SDS hammer drill and a angle grinder but its not working very good lol whats and easy way to remove them :-) cheers rob

001 Nearside front front position lamp(s) not in good working order (not working) [1.1.4a] Whats this mean :-S Had a lil check and it all seems fine to me. ??

I use to have this 500GB external hard drive In my car-pc set-up It was powerd off a Spare hdd molex Inside the car-pc. that i just snipped and joined. Thats the plug that come off the external hard drive> The wires of the plug on the external hard drive are werid colours (Yellow,White, and...

Are there any uprates for the Top engine mounts on the MK1 Clio :-)

On the Roof of my clio (bare shell) it has loads of Nail kinda dents. Like smaller then 2mm And are just like a nail has been put behide and hit. Whats the best way to remove them ? Would it be a case of using a panel beating hammer with a flat Weight under the dent.

This engine is out of a Mk1 93 Ph1 1.2 Clio it was perfect in the other car but after changing to its new shell along with a new ecu and a new loom it started to Be really ruff on idle to a point it stalls. Change the ICV with no luck heres a vid http://www.youtube.com/v/majORFtHbwU...

Is this a fail? is there any way found it E.g Chassis number or some thing :-S ???

Does any one know the paint code for this 1996 Ph3 Clio Can't seem to find the VIN Plate.

Just Picked up a F7P with a F7P ECU and Loom Just wondering would this work with a PH1 Mk1 1.2 Dash loom ? or will there be a problem with immobilizer?

Just wondering whats the best gearbox to be running on a F7p 1.8 vavler lump Also whats the diffrences between boxs :-)

How do i tell the diffrence between a Mk1 Ph1 / 2 / 3 By just the bare shell ? is any thing of the shell diffrent ??? Cheers - rob -

After stripping my clio i've found loads of rubber / plastic grommits missing. Looking for some where to either buy gromits or some thing else to cover the hole. As this is going to be a track car not to botherd about most the holes just there are 2 big ones in the floor that i dont like :-)

My car started its life as a MK1 Ph1 1.2 Clio :-) I have no idea what my goal is. Atm i'm just sorting the shell out making sure its 100% rust free :-) also interior going get some paint and engine bay :-) Todays Work. Interior Stripped out. (foot Rest Removed) ( Bit of the Passenger side...

is this a good compressor to go with this air tool http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=260241047332&ssPageName=STRK:MEWN:IT&ih=016 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=260242204934&ssPageName=STRK:MEWN:IT&ih=016

Ok Some of theses are confusing me could any one please explain there use's. Top Line. 1. ???? 2. ABS ?? 3. ??? 4. ??? Bottom Line 1. ??? 2. ??? 3. Clock 4. Rear Window whiper 5. Ciggy lighter 6. dashboard Dials 7. ??? 8. Central Locking ??? 9. Heaters ??? 10. Front window whiper 11. ...

Just Fitted a new subframe and have sanded it down to the bare metal so theres not one bit of rust on it now. What are the best primers / top coats / rust protections to use now and what order. i was thinking of seam sealant 1st then a primer then a top coat of Hammerite UnderSeal. But have no...

Looking for a Good sanding tool to sand down the paint to the bare metal ready for a new coat. i have a DA machine but i'm finding it hard to get into every conner of the interior of the clio. any other machines out there for this ??

mwhah :-) need to start cleaning up my house lol.

Can any one explain to me what theses are and what they do there on the Mk1 Ph1 wiring loom. dashboard wiring loom 1 2 3 ^^ belive this one to be the rear-demister

Whats the best tools i can get to remove front suspension Struts. Main problem i'm having is the allen key on top.

Ummm Removed rear bumper today and noticed this big chunk of metal cut off :-S is this a mot failual ? and can cut it down a bit to make it look nicer.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110252372662

has any one got pictures of this roll cage fitted to a clio ?? http://cgi.ebay.co.uk/OMP-ROLL-CAGE-Cr-Mo-Weld-in-RENAULT-CLIO-MK1-90-98_W0QQitemZ330138410223QQihZ014QQcategoryZ10410QQrdZ1QQssPageNameZWD1VQQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247

Picked up a Mk1 1994 Ph2 1.2 Clio With a blown engine. so put the engine outa a Mk1 1993 Ph1 1.2 clio into the shell. Its all in but the fuel isnt getting though to the engine. what could it be ???

How on earth do i take the speed-o Cable out the top of the gear box ? Tried every thing to remove it lol some one pleaseee help its the only thing holding my engine in atm cheers Rob

I've Stripped my MK1 Clio right down to the bare shell ready for the cage and new engine and thought while i'm here i might as well protect it from rust. i was thinking of buying a sand blaster. blasting off the old stuff. and then rust proofing then priming and then panting it ?? is there any...

Its a Mk1 Ph3 1998 R reg 1.2. 91,000 Miles No Rust Good condistion heres some photos. So how much would people Value my car at :-) cheers