Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Budgie Dan@SJM Sorry guys I just assumed the powerflex stuff would be better and with the original part I would just have the same problems again. Guess Ill get the OEM ones. You guys have any links?
Budgie OEM appears to be rubbish because the cars making light klunking (not top mounts) noises from pulling of in 1st and braking harshly. Apparently powerflex would make a world of a difference its only £41
Put in the speakers the other day!
Had these lying around for 10 months and now I finally got around to putting them in, heres the somewhat temporary setup.
Sub box bolted through the chasis, the rear seats removed, the car sound deadened, and the parcel shelf holders cut in half so that the...
Simon_16v will do cheers! handling never been right on this thing I have driven a 1.4 clio mk2 and 1.1 (65bhp) mk2 and they feel very different to this. Its kind of annoying! Just ordered 10mm spacers for the front wheels which should stop my wheels rubbing against the suspension. I have a new...
Simon_16v Cheers dude! I want to make it like a Dynamique Sport not a sport rep! I am colour coding the black exterior trim once I have some things sorted. But got some major problem with klunking on full lock and some steering things thats just never been fixed so that needs a serious look through.
The car as it stands now sorry for no updates been busy. Before I begin making visual mods I am having this problem with my suspension this Clio doesn't drive like other Clio's. ABS light wont go away even with new sensors so I guess there must be some intermittent fault somewhere.
Dont...
Right I know when power steering fluid is low this problem occurs but this isn't the case.
Basically I was driving down a country road and I missed the suitable entrance to the road I needed to go down. Now I was travelling at about 35-40 so in the spur of the moment I full locked it left and...
Hi Guys
May need some headlights to be disassembled for me (just the clear outer plastic removed with a heat gun) I would do it myself but I would probs damage it lol
Looking for someone around Bedfordshire area
Thanks,
Jay
Hi Guys!
I have a lot of kit that is going to be going in my car
6 tweeters
6 mids (125w rms each)
2 mid bass (150w rms each)
2 Kicker L7 15
Pioneer DEH X9600BT
Audison Bit Ten D or Rockford 3SIXTY3
RMS wise this will be running around 2000rms (wiring the kickers in 4ohm with a 1400w rms...
Hi Guys!
Finally after months of wondering where the knocking noise was coming from 5 minutes with my mechanic friend and he was able to pin point the problem to the near side drive shaft. So as he took a closer look at the driveshaft he found that the wish bone and a few bolts in the...
Yesterday I got my knocking noise fixed!
Found out my suspension on the near side was all loose :L And my off side driver shaft needed replacing which is what caused my to find out the near side fault! Lucky eh?
xenon trial fit!
I like them, shame the adjusters are broken :( Sorting the...
skinz already off the car mate (my fault for not making that clear) just bought some from a guy on here and I just noticed the white plastic that holds the headlight is all snapped :(
How do you get the xenon bulb out of the xenon headlights?
I twisted the thing that say (turn anti clock wise to open) and then nothing else happens, dont want to break it so... anyone?
Regards
Jay.
Naa the thought of it still being a 1.2 would kill me :)
But I have changed the front grill to the RS one and this week I am changing the headlights to xenon ones.
I did buy some clio 172 alloys which have very minor buckles (didnt know when I purchased) and the buyer refused to take them back...
Going to miss waking up to this :'(
Bye Bye!
Anyway the car has it stands now! Heeps more being done to it at the moment:
Plasti dipped alloys
YES! I will sort out the front plate :)
Day 2! Finishing suspension and brakes:
Pads and Discs done!
Also got a new light from the scrappy!
Here we skip forward a bit, putting the car back together!
Made do with parts I had (no expense spared haha)
The fitment is pretty good hardly any difference from the damage side...
Back in June/July 2013 I was presented with this:
Shame I only took one pic of it in the condition it was in :(
The near side was all smashed in, the light was ripped off and the arch was cracked, both the front shocks and springs were snapped in half, the picture doesn't show you much at...
Hey guys!
I want to get BBS style wheels for my car and the one I have found are:
16 inch
4/100/114.3
8J FRONT AND REAR ET33
I have a 2003 clio 1.2 so I have no Idea if these wheels will fit
help appreciated :)
So When I was 16 I bought two kicker l7 15 with intent to put them in my clio because I was a big bass head back then (I am 17 now so not long ago haha)
Ideally I would run only one maybe the two at 1000rms, I understand the big 3 upgrade and alternator etc...
But I dont want to spend...