Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I have converted my standard lights to HID, it took me around 2 hours in my mates MOT station using the beam tester to get the beam right. Most people wont take this measure therefore end up blinding everyone in their path.
Sounds like some one has changed the shaft or gator and then threaded the bolts when they put it back in, the bolts are steel and the box is ally so its easy for the threads to get chewed. you can get a helicoil kit or re-tap them .
For a 172 you have to think about changing it come MOT time its a b**ch to change, if you know a friendly MOT station then it doesnt matter and a decat will give you the best increase in performance.
419 eater what a site... church of the golden wamth is a must read http://forum.419eater.com/forum/viewtopic.php?t=91563&sid=007d460a5a994ef9f0b4e4813b6ca5a6
Pully snapped on mine aux belt wraped round the lower cam belt pully cambelt went out. All it did in the end was bend 8 valves. everything else was ok there was no piston damage.
Im with BE very very good service, i get 19mbits 1.5km from the exchange the best thing is 1.5mbit upload speeds. No port throttling at all at the moment.
The axels are the same none sport axels have a much thinner anti roll bar in them. Cups are the same but the disks dont have abs rings and they dont have abs sensors
How many walls are between the router and your new PC? also is there any other devices nearby that could cause interference such as neighbours wifi's dect phones etc?