Search results

how do i achieve a perfectly clean effect, in the sun it still looks all streaky and pants, ive been using glass cleaner and kitchen towel. Do i spray on the screen or in the paper to avoid it going on the dash? thanks josh

Need to know what the part numer is for this? if anyone has bought an ICE link plus for the tunerlist radios if you can look at your box and get me a part number, either that or tell me which other cars use the same connectors as halfords have it as not available for the clio whereas on Denisons...

mk2 ph2 1.4. When im reversing then braking im getting a loud single click like a brake pad moving or something from the o/s wheel area, anyone had experience of this, you then hear it click again when you brake in going forward after reversing. any ideas? ta josh

On a mk2 ph2 1.4 16v?

Need the handbook for it if anyone has one, or any other sony ericsson handsfree. ta josh

Had an air leak in my cooling system a while ago and topped up with water. Think i want to flush the cooling system so need to fill it back up with coolant/water solution. The renault stuff was very very expensive. Can you buy it concentrated as it was sold per litre pre-diluted. Or is there...

1. The tweeter on dashboard (driver side) can't seem to work out whats causing it. 2. Something in the boot, making a metal sounding rattle, thought it was the latch for the rear seats so put them down and now its a lot louser so i assume its from the boot any help as to how to sort these...

My sills are bent where you jack the car up (those thin lower bits) just wondering how to straighten them out? thanks josh

Just to confirm. mk2 ph2 1.4 16v there are the following mounts. Top engine mount on drivers side visible from under bonnet. Dogbone mount where the engine is attached to subframe under the car The mount under the battery, are there anymore?

Currently running my mk2 ph2 1.4 16v on mk2 172 wheels (16 inch), already running G-Max 60mm springs But not to keen on them as the rears have only one coil that isn't touching eachother. Ive bought some koni Sport front shocks and am looking for advice as to what springs to put with them, i...

Looking on here at a set of 25mm ones as the last company gave me a refund after not been delivered for 2 months http://www.performancefx.net/wsrenault.htm choice of material is alloy or steel? which do i go for, there is a 20 quid difference in price and if you don't know how these...

Anyone know a knack to doing this without bending the lead inside, ive had a used seal that ive spend 10 mins getting out at the scrappies, then when installing found it impossible not to bend it. ta josh

Plannning on changing my gearbox oil soon. its a 1.4 16v engine, any idea what volume it holds? What does everyone recommend, nothing expensive if possible, also readily available and decent quality, something to make the shift bit slicker than the standard Renault stuff. ta josh

Got a N/S lower ball joint gone on my mk2 ph2 1.4 16v. Motorsave diagnosed it and they showed my the play in it as well. and got me a price one one. Joint was £10 and fitting was £20. does this sound reasonable? also they said the tracking will need doing after fitting, is this correct? thanks...

Me and Feirny went out to take a few pics... clio 1.4 ;) is mine.. c2 is his :) Positive comments welcome, non positive comments by PM only accompanied with your phone number and home address :) :) enjoy :) :)

182 spotted reg Vardy doncaster Anyones? CS sticker in back window.

So ive took the car into renault (3rd time) its on 36k and the creaking and stifness of the clutch appears to be where the cable end links onto the linkage for the clutch assembly, if they bull s**t me tomorrow where do i stand, could i just remove the gaitor part and spray some lube in there or...

Running magnatec 10w-40 atm. Just feel the engine is a bit tappety. Clio 1.4 16v 2004 with 36k on it. Not massively tappety but surely there is something that runs a little quieter? or is more suitable ta josh

If i sit in the car and rapidly move steering left to right i get a really really loud knocking noise and can feel it through the pedals. Given it a visual inspection and its going into renault on monday for this and engine mounts so im quickly taking the suspension, steering wheel and putting...

Just wonderin what you guys think. apparently its just the Old Pioneer equipment rebadged. 200 quid off the usual price. fully motorised. http://www.halfords.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10151&storeId=10001&partNumber=309484&langId=-1

Alright guys, wanting to clean my throttle body, just wondered how i get it off due to it being a tight space at the back of the engine bay. ta josh

Had a lil argument with a curb the other day. anyway since then i drove carfeully to the tire place and had new tires fitted. Uniroyal Rain Tyres all round, since then ive noticed the cars rear end is very floaty and the car feels all over the place, and the rear wheels have started rubbing on...

Just noticed a lot of roll all of a sudden in my car. Like feels really scetchy... Back and wants to creep and rear wheels have started rubbing really bad in the arches, possibly because the amount of roll the car has into corners. What could this be caused by clio mk2 ph2 1.4 16v down 60mm on...

I think my n/s rar wheel bearing might have gone. i can hear like a whirring noise on smooth roads. its a mk2 ph2 (drums), how can i tell if its nackered? If it is gone whats involved with replacing it/price of parts? thanks josh

How tight should the bubber doughuts be on top of the suspension (IE those in the engine bay)? Also im getting a strange whining noise coming from my n/s rear wheel. Sounds very feint and can only be heard on a smooth road doing less than 40. Fingers crossed its not a wheel bearing, the car...

Im considering a de cat for my 1.4 16v. mk2 ph2. 1.how much performance gains am i likely to get? 2. What will the noise increase be? 3. will fuel consumption go up? 4. will it shorten the life of my exhaust or cause any detrimental effects to the engine 5. if i get pulled over for an...

Can anyone give me the torque settings for the 2 nuts and bolts that hold the bottom of the suspension strut to the hub carrier? ta josh

the amount of play in the shifter when in gear is too much, i can move it across the box so much and it feels so loose and old. I drove a mini cooper S the other day and just reminded me how loose mine feels. Is there a bushing you can replace or something? car is a mk2 ph2 1.4 16v.

Hello. Buying some hubcentric spacers... http://cgi.ebay.co.uk/25mm-HUBCENTRIC-SPACERS-BMW-REN-VW-SEAT_W0QQitemZ8066113359QQcategoryZ122154QQrdZ1QQcmdZViewItem Just wondering is this measurement... RENAULT - PCD 4 100 - centre bore 60.2 correct for my 1.4 16v clio.. mk2 ph3 ta josh

Right ill try and explain these issues as well as possible.... the car is a mk2 ph3 1.4 16v on a 53 plate dynamique. Problems are....... When driving in a straight line the steering wheels is pointing towards 11.30, how is this caused? has something been damaged on the steering? Also...