Search results

The standard 18" hollow spokes won't fit over the brakes the only 18's that I've found that will are ccw custom billet wheels at £3000

Yip I fitted the moton 2 ways when I had it last. It also has gt3 sway bars and poly bushes all round. It goes well it's the fastest car I've owned a lot faster than the R8 and a good bit faster than the 500bhp focus rs.

The front bumper and rear spoiler are from the gt2. Gives the car a lot more aggressive look. The wheels look a lot better in the metal than they do in the pics

The cossie belongs to Stu off here he has some pics up in this section already.

Its never been dynod but will be over 550 bhp , its running K24 turbos,larger coolers and inlet pipework ,miltek exhaust and a 1.2 bar map.

After selling this car 4 years ago and regretting it since , I ended up buying it back two weeks ago and set about a bit of a clean up and made a few changes. As I got it back Calliper colour changed to red Seat backs stripped and painted ( thanks to the guide on here ) Wheels...

1999-2003 megane scenic I think they came from Chip after that they went to cable shift. http://www.ebay.co.uk/itm/RENAULT-MEGANE-SCENIC-1999-2-0-8V-BREAKING-MANUAL-GEAR-STICK-ONLY-/390827690618?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AMegane+Scenic&hash=item5aff254a7a...

This was it fitted and sitting in 1st gear, shortened the rod at the gearbox end to bring the stick back.

Im booked up for the 17th of June for a 2 hour open pit with the Focus owners club, my car is still sitting on the trailer from the last time i was out so need to give it a check over when i get home from work.

Here is the megane shifter next to a standard one.

I fly to Korea Sat morning so going to be at least a month before I'm back out again :(

This was the wheels when i got them re finished and the centres done black. If they can be lacquered then I will do that after a re polish, but I was under the impression that you can't as the surface is too smooth to take the paint.

I would recommend running a filter with the position of the bodies on a clio, the last thing you want is dust or a stone getting soaked in. I suppose if not you could cable tie the sensor on as close to the trumpets as possible.

Air temp sensor will go in the air filter backing plate. You need to tap into two off the bodies and T them together to get a vac take off for the servo.

They are bare alloy and have started to oxidise , to the point where I think 1000grit wet and dry will be needed before polish.

Justnow Im not planning on splitting them, just looking for a good metal polish and sealant. Im sure LM's are just a 2 part wheel also so don't think they run a gasket.

Nope Nope I love BBS LM's just hate cleaning them. Eventually I will get them split and polished , along with the centres going body colour. Back to this sort of look.

Dont fit over the brakes Gaz. I got a set with the car originally and sold them.

Sorry i set the wrong link to photo bucket originally. So what metal polish and sealer is recommended for raw alloy wheel lips ?

They are still on the car as I've just bought it yesterday. I had them split and polished/ painted by 'Mike the polisher' 4 years and they were like new but don't really want to send them away to be done again just now.

Ive just bought back a car i sold a few years ago fitted with BBS LM's and the wheels now need a good polish up so what is recommended ?

Got to agree with that Here are the centres i was on about Stu

Nope a beetle :)

Looks good on the new wheels Stu.

I might go up to watch for a bit.

Re: Road/Track 172 Just found these online from the last track day i did.

Hi Tom Ive actually sold the megane/yanoo shifter and switched to the PMS. If i used my car on the road I would of probably stuck with the magane one as it looks factory and gives a nice shift, but the PMS is more direct but is a track designed part so you get the motorsport noises with it .

Re: Road/Track 172 Yes I did have my hot tub behind the garage but never used it, so sold that last month and made a parking space for the track car. Now just trying to get the floor cleaned up as 4 years of abuse has made a mess of the tiles. Hopefully by next week it will be looking lot more...

Re: Road/Track 172 Not done any more mods to the car as I've been busy ,sorting out a storage space for the car and trailer. So this week was spent fencing off a section of my garden and fitting a roller door to the back of my garage to allow access to get the car and trailer out of the way...

It could do with a gripper diff bit apart from that I'm done. Might have a new/old car coming , hence the Clio being kicked out the garage.