Search results

Sorry to revive an old thread, so if remove the airbag wiring and the airbag ecu the car will still run? Or does the uch need a can signal from the airbag ecu to run? I will try it tomorrow but sat here pondering at the moment Light on the dash doesn’t worry me too much

Sorted, car thought it was nighttime because of the sunstrip and putting the headlights on. Turned off auto headlights and it’s all good 👍🏻

So I’ve been messing about with the Clio wiring and it all runs etc I haven’t cut anything out just been tidying it up. Now the climate control screen will come on with the ignition on, and all functions work, but as soon as you crank and start the car the screen goes off and doesn’t come back...

Went off at cadwell by all accounts

Bit of progress today, the EPAS kit I bought turned up 😊 so I immediately got cracking (furloughed life) got the subframe off with the rack I know could’ve probably removed the pipes without taking the subframe all the way off but I really couldn’t be bothered to struggle. Rack blanks and link...

So I’m trying to piece the final part together for my epas setup and getting the controller off eBay. I’ve seen these 2, is there any difference? https://www.ebay.co.uk/itm/142463350168 https://www.ebay.co.uk/itm/262195433245

The B14’s will stay for a while as it will be used on the road occasionally and I do like their compliance, although that’s probably changed now it’s Polybushed. Future Plans: Full cage Once I’ve got a tow car/trailer Coilovers will be replaced with a proper setup. Remove rear beam refresh...

and some quick pics of my previous ZR race car I raced for 5 years and boxster I raced for 2 years

And that brings it up to date. Yesterday I’ve removed the dash to trim back the body loom of unneeded plugs. I have also bought an EPAS setup and cup alternator setup and full strip out has begun. I plan to get a full cage fitted even if I only do track days, hate being on track without a cage.

As it was all out I also Polybushed the subframe, black series bushes in the lower arms and purple series rest. I’ve also renewed the engine mounts with added powerflex insert for now although in time I’m sure these will be replaced too. Also taken the opportunity to upgrade to a 182 manifold...

At the beginning of March I took the engine out the old girl to do the belt, fit a clutch and generally tidy up the bay and engine loom as it had been out before and not refitted properly. At this time I decided as it was going to be going on track this year to strip the engine too to check the...

So fast forward 3 months no longer needed as a daily things are going to get interesting. In the time I’d been using it daily I’d fitted a sparco seat on extra low frame and fitted a ktec bolt in cage.

Hi, so I thought I’d document my journey with my 172 into track car/possibly race car. A little bit of background about me this is actually my 4th 172 and 7th clio having had 2x 172 cups 2x172 1x 182 and 2x 1.2’s. Day job I’m a technician for Porsche which is fun to say the least. So back in...

I think I’ve done that in a previous life this is just adding to it 😂😂

Dash removed. I think it’s officially a project now. Do I start a project thread? Would anyone be interested?

Just read this entire thread, wow the cups come on a long way! Given me extra motivation to do mine now!

Now I’ve got it back together I’m now thinking that I should’ve done an EPAS conversion at the same time. Is it hard to do? I’ve not done any research into it

Ah cool, that would be interesting to compare. I don’t think the numbers will be to dissimilar but the way it makes them I think would be different.

Group N timing. Sounds okay? Gearbox is chattering as it’s got no oil in it, wanted to make sure it ran before I committed to filling it!

That’s a perfect solution @JB21! Thank you ☺️

Oooh that maybe could work, hadn’t even thought that could be a thing, cheers

Will be 6 point again this time round. If there’s no easy way to do it I’ll just wait until I get a proper cage later in the year, then I’ll be able to screw the eyelet in easily

Hi guys, just looking for some advice, so I’ve got the caged/msv bolt in cage in my car (safety devices cage will happen later in year). I’m just wondering if anyone has got any ideas on how to fit a lap belt of a harness (the one to the outside of the car sat in a seat) while having this cage...

Group N timing tool sorted thanks to @1985michael182. Cheers for letting me hire it from you!

Glad it arrived dude, cars looking good 👍🏻

Right engine is built back up, just need a group N timing tool now 😊

Cool sounds great, thanks for your help everyone. I’ll definitely get my inlets sent off to get matched (after all this corona stuff is over!) as that seems it could be great gain for not much outlay. This forum really is the best with all the advice! thank you!!

would you want to hire it out at all? I’ve got the RS lower inlet manifold going on, 182 exhaust manifold and with the 197 injectors a map and timing it should be Just right. ive polybushed the whole car (in process of) and I’ve got Brembo hc discs and ferodo DS2500 pads as that’s what I had...

My plan is to now get it running with standard injectors once it’s plumbed back in, make sure it’s not leaking oil etc. Once I’m happy it’s good I’ll then fit the 197 injectors then get it trailered up to EFI. I don’t suppose you’d want to hire out your group N tool? They seem rare as hens teeth!

Nice one @Eddie555 i bet that goes well now! Hopefully with this setup I won’t be a million miles away from that.