Search results

can't buy timing belt end seals seperatley, only comes in the kit

probably "about" 20-30% louder than stock, very quiet TBH

http://www.sportex-exhausts.com/store_main.asp?int_category_id=24

you don't have an option, its getting done

no i'm being 100% serious for once! For a budget system it is good quality, very surprised when i saw one on a customers car, shocked it was under £300! from memory it was mild steel, but you can't have everything, fitted better than some well known makes!

yep, coolest little thing ever!

they're actually pretty good for a cheap make!

about £1K-£1200 if it had belts and dephaser

na WAY to complicated, and the CTS has to be in the head really, you should've bought the M6 CTS from TDF, replaces the stock bleed screw, very clever

^correct

^standard reanult failure

but what about when the car is fully loaded with 4 fat mates? you can't buy any other shocks other than stock for the 182 cup you NEVER get the alignment done straight away, you leave it to bed in a bit then have it checked/adjusted nothing wrong with Eibachs THE BEST springs available

i bet they say their remap gives 210bhp

could just be the sump plug seal, but looking at that it could be a possible crank seal, but impossible to say over the interweb

hahahaha, superchips "bullshit marketing" secret is out in the open!

max to min is only 1L approx, so don't worry

you should check it every 2 weeks without fail regardless of what car it is or how old it is, 75% of motorists keep me in work LOL

don't do them for the 172/182 from memory

pliers hammer punch (or screw driver if being a bit blue peter) flat blade screw driver 17mm socket and rachet easy

it looks cool

Coolant Temp sensor

Isn't TDF supporting you on this? Surprised he allowed you to use that CTS, horrible way to do it! You not seen the CTS they use? Oil tank will need to be changed, thanks for adding the sight to the header, as delboy would say "you know it makes sense" ;)

none do, you can however use any JC5 with speedo drive

keep the stock airbox and fit a samco bend, it is the best IMO

proper job

you'll never do it with the wheels off thr ground, use an airgun or similar

http://www.dp-automotive.hu

yup

about £400 new

you'll have to remove the pump to get rid of it