Search results

But really how much would that job cost...! And are you in the NW ?

I know, i like it that way................

Even without the plate mine wouldnt fit...

If fitted correctly in this caliper, usually people dont grind enough off the pad ends. It should be able to move freely as the backing plate does expand. Mine squeeled before doing this and 2 friends have too. After grinding a bit more and putting plently of copperslip on the backing plate...

Squeel is never an issue on the Clio even with DS3000....on some brembo calipers it can be bad but its due to the spring clip which you can get new ones to sort it. On the EVO DS3000 used to make you ears bleed until hot..! With the clip nothting..

^^^ yup..

Dont know who fitted then but thats a classic of not cleaning the discs with brake cleaner before fitting. DS2500 are excellent....! BIG BIG improvement over std. They are excellent pads every forum will tell you the same..to me you or who ever fitted them didnt do it them correctly. Also...

Get up to the NW and i will buy you some beer and a Sunday Roast...! Well if you clean my car for 10hrs that is..!

How much for a clean up job like that..???

Any pics..?

205/45 16 PE2's - are the best alraound tyres. At least as good as GSD3 "Especially in the dry" and last a lot longer..!

25miles i think but OMs did the test and got stranded in the middle of nowhere...!...lol

Racing / cup blue anthracite wheels and coilovers it will look the dogs... 134 top speed is a bit worrying though for 192 hp..!

Do i count...;) The cup i think is a bit quicker round the track but the driver is the biggest factor...there are a few GT3 drivers at the ring that could confirm...... FFS.. i was overtaken by a Lupo,,track spec though...

Revert to std and sell the bits, 8k for the car and 1k for the bits..

GT3 6pots yellow..

Oh yes and porsche brakes too...!

Can get some brembos for 250 new...friend in the know but need to know which model..holes spacing etc..

Can someone tell me the spec of the Brembos used on various clios on this forum. Caliper model Hole spacing I assume they use std dics ?? is this correct if not what discs do they use..? More info the better.......

Was from their sit using the tab menus..... Was interested in doing this but seems that there not right for the job...

870...

Well you are in a low rider but hey when there fitted especially in the wett you will likey likey..:D

Glad he didnt listen to your Yoko tones.....!!! :D Must give you these flakey center caps..!

http://www.powerflex.co.uk/products.asp?cat=0026&catalog=0426&submit1.x=23&submit1.y=21 172 part numbers are:= Front Anti Roll Bar Outer Mount (each)PFF60-207-232 23mm9.95 Front Anti Roll Bar Outer Mount (each)PFF60-207-232 23mm9.95 Front Lower Wishbone Bush (4 per car) (each)PFF60-3011...

205s good man hope they dont catch...........:D You will love them..!

You will love them...! Bet you didnt get the 205's though cos of that boy racer suspension...!

Spot on....!

Think you have got the 23mm 16v bushes...... Check the part numbers..

Koni suspension kit and some DS2500 pads...Will give the best results and you will notice a massive difference!!!!! 5 hp is nothing in real world driving the sus kit and pads make a big difference and increase you enjoyment of the car every time you drive it.!

^^^^ i wanna see it.!