Search results

Here is a post i made a while ago about how i connected my ipod to my alpine HU. quite a cheap an good way of doin it. need a HU with aux tho...

Its powered from cigarette lighter, sorry pic didnt work ill try again. Just pluged firewire cable into adaptor for lighter http://erc.qmuc.ac.uk/cliosport/gallery/full/1105900890__ipodpower.jpg

I have read numurous posts from people who want to know the best way of connecting their iPod in the car. Probably the best way to do it is using the dension link but this is quite pricey. The only requirement for my method is to have an aftermarket Headunit with aux input capabilities. You...

Tesco quoted me an extra £300 a yr for just having alloys an a new exhaust! on a 1.4rt! daylight robbery!

Replaced my old standard head unit in my 1995 clio a while ago, but today i installed it into my mothers metro, as it is miles better then the one she had in there. Installed ok, powers up fine. only problem is entering the code. i have no idea how to do this! particularly as the code contains...

I got an alpine CDM9825RB headunit (http://www.caraudiodirect.co.uk/product_info.php?products_id=3045http://www.caraudiodirect.co.uk/product_info.php?products_id=3045) Its got an aux channel, so i bought the lead they recommend as well, an i plug my ipod into that just as i do in my house with...

Perhaps try: http://www.caraudiocentre.co.ukwww.caraudiocentre.co.uk http://www.carhifiuk.comwww.carhifiuk.com http://www.incardiscount.co.ukwww.incardiscount.co.uk http://www.raysmith.co.ukwww.raysmith.co.uk http://www.incarexpress.co.ukwww.incarexpress.co.uk...

I used short self-tapping screws, i.e only screw into the car panel about 5 or 6mm. nothing show on the outside, but if you do find the screw tip come through to the other side of the wheel arc, i would just dad a bit of silicon sealant around it to prevent leakage. Another way you could do it...

I would simply screw a piece of MDF to the side panel in the boot then mount the amp on that, like i have done here. I then simply covered the mdf in carpet so it blends in.http://erc.qmuc.ac.uk/cliosport/gallery/full/1098181480__IMG_2510.jpg

Ok cheers, i got a HU that has got an aux input in the back so its ok. Thanks for your help

Im thinking about buying a clifford alarm off a seller on ebay as it is much cheaper than from a shop, however i dont know where to get it fitted. Does anyone know of anywhere in the Bristol area that will fit an alarm (and not supply it)? Any idea of what sort of cost? Cheers

How would i go about installing a playstation 2 into my car, i.e how would i power it? would i need a power inverter? Also how would i power a 7" monitor, can i simply run a power cable off the battery with a fuse like i have done with my amp? And finally will it be ok to run a ps2, monitor...

I have bought one of these for my ipod to connect to my alpine HU. They work fantastically! Depends what pioneer HU you have as to what cable you need. Try this page on Car Audio Direct http://www.caraudiodirect.co.uk/help/ipodfriendly.htmlhttp://www.caraudiodirect.co.uk/help/ipodfriendly.html...

Yeah ive heard of people doing that before, mounting 6x9s in individual boxes in the boot. Should work well as sealed enclosures behind the speakers will help improve the sound quality as a sealed enclosure does for a sub. But yeah boxing them in the boot should work well.

Thats the one, thanks a lot!

I have recently bought a 1995 Cilo 1.4RT and fitted in the Dash is an imobiliser which you have to insert like a chip key thing for a few seconds before the car will start. Does anyone know if this is a standard factory fit for 1.4RTs or is it an aftermarket fittment. The key has a logo on it...

Thanks people!

Hi I want to install a 12" neon into the boot of my clio to illuminate my sub amp etc.. Does anyone know if it is possible to power the neon from the exsisting light fitting in the boot? so that when the door is opened the neon will come on. Cheers