Search results

So I’ve just picked up a second hand PMS shifter. Got around to fitting it today and realised that the gearstick base seems to be pulled in meaning the washers can’t go between it and the bearing on the linkage. I think I am correct in that that is where the washers should go!? Any ideas on...

So I’ve finally got around to getting my BC DS coilovers fitted. Someone told me that the front top mount nut is 100NM! That sounds mad! I’ve searched and found two bloody torque settings, 20NM and 60NM?! So my question is which one is it?! Got ktec solid top mounts (if that makes a...

So I’ve finally got on and started the process of getting my old ktec coilovers off and the DS coilovers on. Now my question is as these BC DS coilovers are different to adjust height (whole shock body turns in hub mount), has anybody got the distance measured from the hub mount bottom to the...

Had a dyno meet yesterday. Was really excited to see how she went then I got this dismal print out. Gutted to say the least. The rollers did work as some other lad with a low boost turbo 182 said it would make 230 - 240bhp and in it came out at 231bhp I believe! 152.7bhp at engine and 150lbft...

Just wanted to try and get an idea of common serviceable coilovers that people are using. I’m currently looking into upgrading my Ktec basic coilovers. Budget of around £1000. Hoping the knowledgable folk you are will be able to list some options and prices of decent choices?! Cheers

As per title. My Ktec coilovers (not 750MC) have shat the selves as I suspect the plastic grit guards went brittle and cracked off as I can no longer see them! Looking for suggestions for around £1000. Ideally looking at road and track use. Want some full coilovers but the type with helper...

So I recently fitted a sports cat to my car but used the old sensors (182). During mot when it was going on the emissions tests it threw an EM light up. Codes say a sensor issue. Cant remember the code unfortunately. Deleted the code and the light stayed off until the car was left on idle the...

So I’ve recently picked up this https://www.argos.co.uk/product/8043069 I bought a auto finesse snow foam lance with a nilfisk/alto adaptor. But I’ve recieved the lance and the adaptor diameter on the section with the lugs (see attached image) makes the fit into the lance way to tight meaning...

What does/did this bracket do? Doesn’t look to have anything attached.

So I’m looking into buying a decat pipe to finally enable me to fit my Ktec ultra exhaust. Just want to get a heads up as to if this will throw up any dash lights or cause issues that need other things to sort them? Any advice much appreciated

So going to give the front arches a good clean and protect and spotted these plastic parts (presume they are guards for dirt) cracked and deformed. My question is will it damage anything if I remove them as they are pretty knackered anyway?! Cheers

So I bought a cat back Ktec ultra performance supersport exhaust second hand last week and just wanted to get some advice before I start anything. The stock centre to cat section (1st pic below) seems to be v banded? The Ktec section is just sleeved over so would I be right in thinking I can...

So I just picked up a second hand dogbone with purple poly bushes. I have realised it does not have any washers for the smaller side (2 I believe). My question is what is their role and how important are they!? Rather ask this before fitting. Cheers

So first time driving my Clio In substantial rain and when stopping then going at lights or traffic I noticed a sloshing sound coming from the back area of the car. Once I pulled over I looked into the side sections behind the rear quarter panels and found my passenger side full of water!!!!!! I...

So recently fitted my brake discs and pads then went for a drive and heard a metal sort of tapping sound from front right. Jacked up and removed wheel to find my brake pads have moment up and done and slightly between disc and Caliper back and piston. Could it be a sticky piston not pushing...

So I’ve had this problem with both my original spoiler and then my cup spoiler I recently fitted. When it’s first plugged in the brake light works fine but then when I check it a while later it will not illuminate? Really erking me but can’t really think what it could be. Possibly an earth...

In need of some help! I’ve revently lowered the car and can really feel the affect on the bump steer. This is being remedied with the PMS bump steer kit. My question is that their roll centre kit says it requires Laguna hubs? So will it not fit on my car in the existing set up? Don’t really...

As title suggests I’ve got a set of Ktec coil overs to fit to my Clio 182. I’m currently waiting on some new febi top mounts and bearings but then will be ready to fit. I’m wondering if anybody with knowledge/experience in doing this would be able to help out. I don’t own an impact wrench...

As title suggests I’ve got a set of Ktec coil overs to fit to my Clio 182. I’m currently waiting on some new febi top mounts and bearings but then will be ready to fit. I’m wondering if anybody with knowledge/experience in doing this would be able to help out. I don’t own an impact wrench...

So as the title suggests I am looking for some advice about top mounts. I’ve recently picked up some brand new Ktec Clio 182 coilovers. I had a thought that the old bearings and top mounts would probably benefit from being replaced and thought this is the best time to do it. Below is a link to...

This is my first ever thread/project post ever on any forum at all. New member on here as I’ve just picked up a completely standard silver 182 non cup. It’s had one previous owner. 116000 miles with full service history with Renault or Ktec. The aim is to slowly turn it into a fast road/track...