bearing

Can any one help I had my Clio sports lowered and the rear wheel bearings since a Mot test show they have some play in them ! When I hit a bump on the road or going road a corner turning left it feels like the car back end jumps and feels like the car is going to spin off ' I don't know if its...

Hi guys I have a standard clio 57 plate which is making a loud noise coming from the rear offside wheel when you do over 20 mph. I have jacked the car up and this wheel has a grinding noise like its the brake shoes scraping on the drum but when you spin it, it doesn't spin freely and stops quite...

hi guys, I need to replace my rear wheel bearings, have a lovely noise coming from the rear of the car. It has come to my attention that the rear wheel bearing is in the brake disc. how difficult is it to just replace the bearing without replacing the disc??? or am i just wasting my time and...

Can I get a front wheel bearing for my 182 cup from a local motor factors or is it only Renault that do the cup bearing? cheers

Few days ago a humming/drone started coming from the rear my 172, so got a mate to check it out & he diagnosed it as the bearing. Am I able to just get a new bearing or is it integral to the disc like my mate thought it might be? cheers.

I'm getting a growling sound when moving, starts at about 10mph. First thing I thought was wheel bearing but I checked all the wheels by by spinning them by hand and everything seems normal to me. No growl, all free so couldn't be a seized calliper which was another thought. The noise definitely...

I have a 1.5 DCI (106 version) 2007. It has a noise that I cant put my finger on... like an air noise or someone suggested a bearing noise. The noise starts at 30mph but gets slightly louder and more noticeable past 35-40mph+. It isn't a very loud noise and it makes no difference on...

As above got a wheel bearing gone are these the same as 172 or a Laguna If not where can I get some thanks ​neil

Hi everyone, I have been looking up information on the above and found this forum. My girfriend's Clio needs the rear bearings replaced as it's beginning to sound like a spaceship. The brakes also need attention so while I'm there I'm going to change the drums and shoes. I've only been...

Hi guys Been doing a bit of searching and noticed that some people are using megane release bearings when changing clutches Is there any benefit for a megane compared to the standard Clio? I only ask as I'm sourcing the next part of my build and have bought a clutch but will be putting a need...

Anybody have the part numbers and prices for these or who to see about getting them ? My Hubs are currently of the car and i would like to put some new bearings in before i do some track time. Also after a Bosch Lambda sensor

I've started getting a rotational grinding - drone noise seems from the rear. Gets louder with speed. I've quickly jacked it up and there isn't excessive movement when rocking the wheel but definitely a grinding when I spin the wheel. My pads I know are well past there best and I'm...

Anyone else had any issue with these? Got the discs and bearings changed on the 182 at the end of October last year, now it's droning away all the bloody time (99% sure it's the rears, certainly sounds like it's coming from there but no heat or anything being generated). Could there be any...

Am'i right that if you have side to side play on the front wheel its the track rod end?,as I get a noise from the p/s/f when I turn right sounds like a wheel bearing tho?.

Hell all i have bought a clio 172 (non cup) Drives in a straight line fine and can turn right 100% fine but soon as you go anywhere near a left hand turn at all there is a very harsh vibrate in the drivers front corner, EG when the wheel bolts have been left lose, No i have had a look and the...

Can someone validate my diagnosis please? Rubbing/grinding noise from rear left wheel, increases with speed, gets worse when turning (in either direction). Nothing obvious rubbing. Wheel bearing?

How do I replace these and can it be done with the car on the ground or will I need to put it onto stands? Thanks in advance

Can the bearings be pressed in or do you need to buy whole new hub?? also does anyone know the price for hubs. Thanks

Sure this has been asked before but looking to upupdate my discs and pads. Been told there are two types of rear disc, one with and ones without rear bearings? how do I know which ones I have on my car!? It's an 02 plate 172 ​thanks Matt

Hi all, about to press new bearings into rear discs but wondering which way the rubber lip on the bearing should face? Have access to a bearing press before anyone says about that, just wanting to double check on the bearing situation.

I have a loud hum at about 2K rpm . Sounds like it is coming from the rear and have jacked the car up and spun the wheel and there is a metal on metal sound when you spin the wheel but no wobble if you pull the wheel . Checked the front and it does make the same sort of noise but not as much...

Are there any differences in any of the above in a clio 182/182 cup and a cup packed 182? ​Thanks :)

can you replace the bearings in the rear brakes or do you have to replace the disc

As far as I am aware my 182 engine has spun a big end shell. Getting a new engine put in next week so all good. I have decided to keep the old engine and rebuild it as a spare (Might make a forged build), Getting to the point as far as the crank is concerned is it worth buying a new one or...

hi my 172 has started making a noise from the alternator bearings , when i spray a bit of wd40 on it the noise goes away , can the bearings be changed ? or isit a new alternator jobbie ? also can the alternator be swapped over with basic tools ?

As above, I need to replace my rear wheel bearing and want to get some good quality ones. And while I'm asking, is there any good fronts too without buying from Renault?

hi all, i was just wondering what the average price of a rear wheel bearing replacement usually cost? i have a 1.2 t reg clio and have just been quoted almost 70 pounds for parts, labour and vat. does this seem about right? Thanks james! :D

hello all little info pls .... 1 of my rear bearings has started to whine so time to replace them my question is are they a pain to fit ie..are they pressure fitted to the disk? should i get disk/pads/bearings all in 1 kit ? or just the bearings? the disks and pads that are on now have loads of...

Hi Guys, I get a humming noise that is proportional to the speed and I can make it quieter round a right and louder round a left. I've jacked it up on to stands and checked the wheels and there is a tiny amount of play on the n/s wheel but the o/s is fine. When I check the driveshafts they...

I'm changing a front wheel bearing on my cup packed 182. It looks like the bearing will press out of either side of the hub, I've removed both circlips. Is one way better than another? ​Thnaks.