bearing

I have a whine coming from the front which is most apparant on the left hand side when the car is driven spiritedly around right hand corners. How would I diagnose if it is a wheel bearing or a gearbox out job to get the diff bearings done? Thanks Sam

Can someone confirm if the ph2 clio uses the same size rear wheel bearing across the board. On ebay there are listings like this...

I will be having my Springs replaced (not Shocks) due to a front broken offside one and the Mechanic said buy the Spring(s) and top shocker mount and bearing :S Any ideas? Will it need it, as I say I'm getting the broken front Spring fixed to pass the MOT.

as above does anyone have the size for it as I ordered a bearing but not sure if it right!

They're not meant to have any axial play right?! I've had an unrelated issue (rear brake(s) sound like they're catching when warm), so I whipped the pads and disc off, cleaned up the caliper with a wire brush etc. noticed when taking one of my rear discs off, it made a bit of a suction sound...

Hello folks have an annoying tap tap resonating sound coming from the back of my car. It's only there between 50-65 mph ish on smooth surface and can't figure out what it is. Believe it coming from passenger side rear wheel. It's just had new discs with bearings everything is assembled...

Hi, hadn't had the best of look today but thought I might as well change my rear discs. I got them off easy enough checked to see if there was any spacers but there wasn't, put the new ones back on (got them from a local parts place) tightened up and wheel on then checked the play and there's...

Hey guys, question about my trophys disks etc.. Asked a supplier on ebay about a mintex kit he has for sale.. Disks, pads, bearing and asb ring. When asked if they'll fit my trophy he said no. There advertised for 172/182.. Any ideas? Is the breaking system different on my troph to a 182...

Hi Guys Do the rear brake discs always include bearings? I had my discs replaced summer time last year and now my bearings are showing play? Is it likely the garage pressed my existing bearings into new discs or would my new discs have come with bearings? I don't want to fork out a load more...

Seems like I have never ending bearing problems on my car :( Firstly, the noise I have on the car is like a wheel bearing. I've checked both wheels and there's no grinding or play in the hubs. Also both front wheel bearings have seen less than 20k miles, the newer of the two being changed about...

Over the past twenty thousand miles I have had to replace the rear disks twice on a 172 Cup. Due to a very noticeable whirring noise which was down to the rear bearings in the disks failing. This noise has started to come back for a third time. Can anyone shed any light onto what could be...

Hi Everyone, There is a droning sound coming from the back end of my car which seems to get worse with speed.. am I right in thinking the rear disks have the bearings as part of them, so if I just go to EuroCarParts and buy some new rear disks/pads it's a fairly simple operation to have them...

Just wondering what people would recommend for a track car? I am swaying towards the powerflex black series at the moment.

Hi all, O/S front wheel bearing has gone in the clio. Been phoning round garages in Edinburgh (i'm too far away from my local guy back home since moving here) and they are all quoting at least £130 per side to have them done. This seems a little expensive to me? Can anyone recommend a reliable...

Driving home from work the other night, back end of the car sounded abit like a tractor, quite a bit of vibration, and feeling wheel wobble at about 60mph.. so I booked my car in to a local garage (family friend) to get my wheel bearings checked.. please note, this side wheel bearing was...

Hi everyone. This may sound like a stupid question but I've recently bought a Clio 182 but have noticed a humming noise coming from the front and have come to the conclusion I need to replace the front bearings. The question I have is my 182 has Cup suspension fitted from Renault. Which size...

Hi guys! :-) Doing the "soft clutch pedal" converison to my old Mk. 1 Hybrid.... (I am a weak old man!!!) I have all the nessesary parts but the release bearing. The release fork is quite a bit chunkier than the std. mk. 1 part meaning that the std. release bearing won't fit. So I guess I...

Just a quick one chaos Got a wheel bearing whine on my DCi, goes away when I turn left. Any idea which side that'll be?

I noticed that one of the bearings has seized so I have ordered some new ones. How do you change them are they pressed in or just push in?

I have a really noisy wheel bearing on the front sounds like passenger side but drivers disc is hot but passenger is stone cold???

My drivers side front wheel bearing has started to make a noise so im going to replce it in the near future, the oly thing is ive read on a few ebay auctions that some clio sports have a bigger wheel bearing than others? Is this true? And if so does anybody know which one i need? My car is a...

I got the parts(wheel bearings) I just need to know can anyone who's got a press to pop the out and in for me or know anyone who can for me that's not going to cost me a fortune ..l went to one garage they wanted £80 just to do that for me ... Pfft don't think so.

As above, replaced a wheel bearing about 2 months back, probably covered around 3000 miles and it's failed again. Removed and replaced the hub myself but got a garage to press the bearings out/in. Is it possible to press the bearing in wrong or is it probably just a bad/faulty bearing?

Hi, I'm replacing my crankshaft oil seal, sump gasket and resealing the crankshaft bearing cap. Do I apply sealer to the bottom of the cap around the bolt holes or just on the sides as it doesn't look like it has had any on the bottom before. Thanks.

I recently jacked up my car, only to discover that the rubber boot that covers the aux bearing is missing. What the heck is that bearing for anyway? Can it be replaced, or is it new driveshaft time?

hey just got someone to give my car a once over and both rear bearings are f**ked explains weird handling! here when you buy new discs when you get new bearings as well worth doing that's as apparently on their way out. just wondering where is the cheapest/ best place to get them?? cheers boys

Guys My car is making a rattling noise when clutch is up, when its down its fine. Is this the throwout bearing, if so how can i get this fixed ( I DO NOT want to get a whole new clutch) Cheers

Hi Guys, Just got back from a track day and the rear drivers side bearing has gone. I have been reading on here and just about everyone says to just buy a new disc with the bearing built in. However, I am fortunate as my mate has access to industrial presses so can easily pop the old bearing...

Hi Does anyone know what thrust bearing the early UK 172 sadev box uses as its larger than a standard 172 one , mine was lost when the box was sent to SWR and they said there's a few types so measure the clutch plate , but I'm only running a standard plate and thats with Fred at the moment so I...

Just getting round to changing the rear discs and pads and the new ones have the bearing already pressed in, when removing them I am left with this, anyone know and easy way to get this back bit off as I can't get it to budge, it's like part of the bearing split when I removed it