LY 182
Cheers
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
2010 clio 1.5dci project
- Thread starter 24JSeymour
- Start date
-
- Tags
- clio
Looks nice man! I also got a new clio from my parents haha follow my project! =)
Thumbs up
follow my project! =) Thumbs up
LY 182
What do people think of this colour wheels ? Getting mine refurbed after winter and fitting coilovers
Dan...
ClioSport Club Member
What do people think of this colour wheels ? Getting mine refurbed after winter and fitting coilovers
would look awesome in my opinion
I'd say keep white
Where did you buy the bulbs?
Was it difficult to change in the front as well as in the back?
Please explain.
Best regards
Was it difficult to change in the front as well as in the back?
Please explain.
Best regards
LY 182
Im guessing you mean the indicator ones ? If so Just of ebay, front ones are very easy and the back ones arnt too bad but you have to take out the rear light
Thanks!
What kind of bulb type is it? Is it difficult to take of the rear light?
Best Regards,
What kind of bulb type is it? Is it difficult to take of the rear light?
Best Regards,
LY 182
its a py21w i think, the rear light is just 2 or 3 screws and then pulls off but there is little rubber things holding it in still and these can be tight
LY 182
Goes through 1st and 2nd Alot quicker, and has alot more torque, overtaking is alot easier now haha
And how did you do with the front indicators?
Did you change the bulbs on the side? i think they are orange bulbs there 2...
Best regards,
LY 182
Front indicators are the same bulbs as the rear, just open the bonnet and there is a rubber grommet, you can acces the bulbs from here, i never changed the side ones no
LY 182
New private plate
why did you take of the badges? :O
LY 182
What badges ?
LY 182
I never had the covers, they were just wraped in carbon, looked abit tacky round the edges soo took it offBlack badge covers ?
LY 182
Haha cheers man! Yee ill see how long i get without been pulled for the plate then ill have to go legal lmaoWoah, massive improvement to when I last clicked this thread! Love it! Plate is cool too, if a little 'questionably spaced'
glenn_adam_doble
ClioSport Club Member
Haha cheers man! Yee ill see how long i get without been pulled for the plate then ill have to go legal lmao
I got a £60 fine off a wonderful Cleveland police officer, for having a apparently non conforming plate, even though It was sold to me as road legal, off a dvla approved reg maker, to which he clutched at straws telling me that the bs code is just for the plastic, don't get yourself a fine just go get some clean ones knocked up at halfords
AB 182 w/Recaros
very nice first car mate.. wish i had that much to spend!
Last edited:
LY 182
ahh nightmare, ill be getting some more clean plates made up at some point so theyll be legal just as a backup
Nice looking car mate. some darker headlights off of a Dynamique/GT/etc would really transform the front though IMO.
ps im taking it that with your car being an I-Music it has bluetooth? how does it work if you dont mind me asking? does it work off the buttons on the head unit or the buttons behind the steering wheel? reason I ask is im looking to add the bluetooth from an Imusic to my car.
ps im taking it that with your car being an I-Music it has bluetooth? how does it work if you dont mind me asking? does it work off the buttons on the head unit or the buttons behind the steering wheel? reason I ask is im looking to add the bluetooth from an Imusic to my car.
LY 182
cheers!, the bluetooth is under the glovebox and linked into the headunit harness, its controlled of the steering wheel controls, i have an aftermarket pioneer HU now though with bluetooth so i just use that
Cheers for that! Is it a parrot one? And did it display calls etc on the radio/time/date screen at the top of the dash or its own separate screen?
how much was the spoiler buddy? And was it easy to fit?
LY 182
Im not sure on what make it was, and yes it used the screen on the top of the dash, the spoiler was about £200 and its not too hard to fit, you need to drill holes in your tailgate though
LY 182
I Went down to exhaust a fix in darlington today to discuss how to get the best sound from the little diesel!
origionally i was wanting a custom turbo back exhaust with a decat, but he recomended against the decat as it would loose backpressure for the turbo to go against and slow the car down
so we basically chopped off my standard backbox and tried numerous aftermarket ones to try get the nicest sound,
We went with a 2" bore resonator with a 3" twin tip
herse some pictures and a video if i can get one to work
It is filthy already because of the wet roads and from the smoke it chucks out
origionally i was wanting a custom turbo back exhaust with a decat, but he recomended against the decat as it would loose backpressure for the turbo to go against and slow the car down
so we basically chopped off my standard backbox and tried numerous aftermarket ones to try get the nicest sound,
We went with a 2" bore resonator with a 3" twin tip
herse some pictures and a video if i can get one to work
It is filthy already because of the wet roads and from the smoke it chucks out
LY 182
Dont think the videos working ? Anone any ideas on how i can put one up ?
Knuckles
ClioSport Admin
upload to photobucket and paste the link direct
and isnt the best exhaust for a turboed car no exhaust? i.e the freer the flow, the better?. so keeping back pressure will restrict the power?
and isnt the best exhaust for a turboed car no exhaust? i.e the freer the flow, the better?. so keeping back pressure will restrict the power?
glenn_adam_doble
ClioSport Club Member
interested to hear this exhaust as i am looking into getting one for mine, heard good things about that place in darlington
i think the back pressure thing is a myth, my logic is a freer flow, the easier it is to spool the turbo, i will be getting a decat when i find the time, as it resonates the pigeon sound more
either way looks good mate, think it needs a cut out or GT style bumper to look more OEM
i think the back pressure thing is a myth, my logic is a freer flow, the easier it is to spool the turbo, i will be getting a decat when i find the time, as it resonates the pigeon sound more
either way looks good mate, think it needs a cut out or GT style bumper to look more OEM
LY 182
Thats what i though, thats why i asked for a decat and no backbox but the man said the turbo needs backpressure pr something ? Dont ask me haha i just believed him, it ended up about £200 cheaper just putting a aftermarket back box on and a new tip,
LY 182
Video hopefully?
http://s1062.beta.photobucket.com/?src=wap
http://s1062.beta.photobucket.com/?src=wap
Knuckles
ClioSport Admin
im not saying youre wrong, i just thought it'd be worth mentioning incase this guy was speaking s**t to you.
i cant remember why but i remember turbo cars need free flowing exhausts and n/a cars need back pressure
video didnt work for me, took me to my pb
LY 182
Yee i understand, im not that botherd anyway, i only really wanted noise and it sounds alot better now imoim not saying youre wrong, i just thought it'd be worth mentioning incase this guy was speaking s**t to you.
i cant remember why but i remember turbo cars need free flowing exhausts and n/a cars need back pressure
video didnt work for me, took me to my pb
see if this link works... http://s1062.beta.photobucket.com/u...B-7E61AFDBACA2-6218-000003D107C3438E.mp4.html
LY 182
Cheers
LY 182
Got the kw v1 coilovers on today! Took abit of getting the right height i was after, wound them all the way down at frist and this was the outcome...
it was rubbing the arch 24/7 soo went and raised the fronts 20mm the backs are wound all the way down with the adjuster rings still in,
so im gonna go test it like this see if its rubbing anywhere, ill clean it and go get some propper photos sometime today
it was rubbing the arch 24/7 soo went and raised the fronts 20mm the backs are wound all the way down with the adjuster rings still in,
so im gonna go test it like this see if its rubbing anywhere, ill clean it and go get some propper photos sometime today
