2118 Issues - Crys

[Andyrg@ ClioTurbo]

Hi Guys.

I have a set or should i now say i have 3 2118 wheels. After purchasing some wheels from here i was told one of the wheels had the speedline work engraved into the wheel, and the other three didnt, I was told that this was the only difference, Happy days.

Fitted the wheels and no problems, untill i came to drive the car and one of the wheels is touching the rear inner arch nd the car wont move, i scratched my head and swapped it from front to back, the wheel at the rear then is fine, and the one of the front hits the strut, the ofset on the one thats engrved it obviously a different wheel!!

needless to say im a little cheesed off and have pmedthe guy whom sold me them, i hope hell do the right thing and refund me the price of a wheel.


The wheels have been powercoated and i am strugling to rear the rear spoke, what ofsret shoudl the clio have on them?? 15" Wheels

Andy

 

[Cro]

It'll be stamped on them sure andy. Usually 38 and 43 are the 2 common ones they come in. Nothing a quick 5mm spacer wouldnt fix if thats the case

 

[Soot1e]

The ET value is sometimes stamped on the rear of the Hub, you'll havw to take 1 wheel of to check, then buy another to match.

 

[Andyrg@ ClioTurbo]

id rather have a new wheel rather than spacers, with the wheels being powder coated its hard to see will get my mate to coem have a look for me as i am blind im sure it must be a 43

 

[Soot1e]

You can measure it yourself within a couple of mm's

 

[jenic]

Its stamped inside the spokes on the front of the wheels on 2118's.

 

[p@blo]

Weren't these from an ex racer Andy? If so theyre likely to be et42 which wont be stamped on them.

Did you weigh them too?