ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
AndyRg - 20VT French/German Sleeper ish
- Thread starter Andyrg@ ClioTurbo
- Start date
- Status
Trophy Turbo :)
Its defi not a Chinese copy turbo its a genuine td05 with a new bearing kit and wheel with a cover, I belive the front cover comes from japan, the lad who builds these for the subaru lads has a very very good name l. I woulnt use a cheap s**t copy turbo too many bad things from them
I didn't think you would! The housing was what made the I impression.
Trophy Turbo :)
Well the cars back together now and rwady to rock and roll.
Few little things to tidy up, dash top being the main. Fit pas and rock and roll for mapping when I get back from germany.
Then ill get it advertised on piston heads.
Or I might just keep it and get a loan out to help my wife out ha
Few little things to tidy up, dash top being the main. Fit pas and rock and roll for mapping when I get back from germany.
Then ill get it advertised on piston heads.
Or I might just keep it and get a loan out to help my wife out ha
I'm starting mine in a few weeks once I get Vikki's Clio up and running.
Trophy Turbo :)
Ive got loads of bits if you need owt.
Andy
Andy
Ideal, although I know mine will be slightly different in the sense of it being a 6 speed, so I suspect I'm going to need to chop parts out the subframe both sides.
Trophy Turbo :)
6 speed good god..... unsure how you will grt the diff in the back end its about 5mm from the rack with a 5 speed
Trophy Turbo :)
Just a small update, and a review on what i can only say total transformation to the car.
The Brembo 2000 pads combined with the Brembo Discs and the Removal of ABS with the Bias Valve along side the PF665 Fluid has made the car now wheel some what safe when breaking no longer does it float at the back end...
The breaks had only done 5000 miles, and when i serviced them this time the front carriers had stuck, so that may well have been part of the issue.
Cup Shocks and Eibacjh springs at the back, well what can i say how the hell did i ever live with the Vmaxx i do not know!! what a pleasure to drive.
Boost been turned down to a Small .8Bar until i can get the mapping sorted after the "ring" it feel so slow its unreal!!
Next to do is the interior tidy ups and then mapping
Photos of a large scale tonight
The Brembo 2000 pads combined with the Brembo Discs and the Removal of ABS with the Bias Valve along side the PF665 Fluid has made the car now wheel some what safe when breaking no longer does it float at the back end...
The breaks had only done 5000 miles, and when i serviced them this time the front carriers had stuck, so that may well have been part of the issue.
Cup Shocks and Eibacjh springs at the back, well what can i say how the hell did i ever live with the Vmaxx i do not know!! what a pleasure to drive.
Boost been turned down to a Small .8Bar until i can get the mapping sorted after the "ring" it feel so slow its unreal!!
Next to do is the interior tidy ups and then mapping
Photos of a large scale tonight
I don't think the diff casing is any bigger on the 6speed, it's height is massive compared to the 02j
Trophy Turbo :)
I have a 6 speed and a 5 Speed ill measure so we know.... it looks a LOT bigger LOL
Trophy Turbo :)
Project finished. Sold and a upset .
Lol
Hope the new owner enjoys her!!!
Lol
Hope the new owner enjoys her!!!
182, 6r GTi
having 270hp and 285lbft in torque in my LCR was savage in the wet/cold and that's a big car, i bet this beaut is an animal !
182, 6r GTi
and then i see you've sold it ! 
Just read through it all mate.
Very special little car with bags of ££££ been thrown at it, id be keeping it mate if it was mine and sell the other cars that you have.
I guess the other cars can be re bought if you ever felt the need to but there will never be one of these.
Anyway if it does get sold then good luck with what ever is next.
Very special little car with bags of ££££ been thrown at it, id be keeping it mate if it was mine and sell the other cars that you have.
I guess the other cars can be re bought if you ever felt the need to but there will never be one of these.
Anyway if it does get sold then good luck with what ever is next.
Want a grey supercharged one? Lol
Don't tempt me.. but.. What you got? ?
Quick rundown of spec and power?
Thats the problem, much as I love jumping in and going for a blast I don't get enough time so Id like someone else to enjoy it
A quick run down?! Lol..
Erm...
Porsche grey black paint
Poly carbs
Buckets
3" 4 point harnesses
Wilwood 4 pots with ds3000 pads
Braided lines
Bilsteins
PMS Top mounts
Oz f1's
Half roll cage
Rotrex supercharger
12psi boost (when last rolling roaded @ 10psi, barely run in it pulled 268bhp)
Pro alloy rad and intercooler
Ktec exhaust
ARP Rod bolts
630cc injectors
3Bar FPR
Probably loads more I can't remember...
Sounds great mate, could sell my track car if I had this..
It does go well on track. I'm owed a Christmas present from the parents to weighing up getting them to pay for a forged setup. (Parts anyway)
That's a good Christmas present!
Yeh. I'm owed it with what I've done!
I'd like to see high 200's if I did it. Yeh I followed it closely when It was being done. Have one in the pipeline myself when I get round to it lol.
I wanted to see yours lol. Not started yet then?
Ish. Engine and box are sat In the bay. Car has sat at the corner of my yard since .
- Status
