Base-mounted seats with Jon Foz subframes - mounting belt buckle?

[plenty]

Seen lots of posts about bolting belt buckles to side-mounts for bucket seats, but what if I'm using base-mounted seats with Jon Foz subframes? How do I mount the belt buckle?

 

[Louis]

Seen lots of posts about bolting belt buckles to side-mounts for bucket seats, but what if I'm using base-mounted seats with Jon Foz subframes? How do I mount the belt buckle?

 

[frayz]

The issue with having a fabric/strap-mounted receiver is its a pain to plug the belt in as you're forced to hold the receiver with your other hand. This can be awkward. Always use a firm cable or suitable bracket-mounted receiver if possible.

 

[plenty]

Ok - so just bolt down using the bolt to the floorpan. Makes sense - thanks!

 

[Louis]

The issue with having a fabric/strap-mounted receiver is its a pain to plug the belt in as you're forced to hold the receiver with your other hand. This can be awkward. Always use a firm cable or suitable bracket-mounted receiver if possible.

I just cable tied mine to the side mounts and it went in easy.

 

[JamesBryan]

I did the same as Louis.

 

[plenty]

Don't suppose anyone has figured out a solution that allows use of OEM pre-tensioners? I know Jon Foz's Recaro mounts allow this, but am wondering it can be done with his subframes as well.

 

[frayz]

Don't suppose anyone has figured out a solution that allows use of OEM pre-tensioners? I know Jon Foz's Recaro mounts allow this, but am wondering it can be done with his subframes as well.

Make your own brackets mate, theyre only a single bolt AFAIK.

 

[plenty]

Make your own brackets mate, theyre only a single bolt AFAIK.

Sadly my skills don't extend that far

 

[frayz]

It wouldn't cost much to be fabricated.