PH2 Cup Racer
Evening All,
I though I may as well start a build thread. My father and I recently bought a ph2 cup racer, mainly for trackdays to begin with then looking to enter in our local sprint championship in the new year.
We got the car from Scotland just before christmas and work has begun!
I managed to find a couple of pictures from previous owners...
The current spec of the car is: (Taken mostly from the listing)
Engine : Clio 182 sealed cup spec engine, Omex 600 ECU. Orbisound exhaust and sports cat.
Bodyshell : 2005 Lhd shell refinished inside / outside and underneath in 2k Renault Yellow. Around 900kg. Front strut brace. Electric power steering.
Gearbox : Sadev 6 speed sequential , Flat Shift ( Full Throttle ) Dog Engagement with Limited slip diff. Illumenated dash shift display.
Suspension : Renault Sport Cup spec non adjustable Bilstein Dampers. Modified Cup spec rear beam , Modified front Lower arms.
Brakes : Clio 182 Sport Calipers with Competition Mintex Discs and Carbone Lorraine RC6 and RC5+ pads, Goodridge Hoses and all lines throught inside of car. Brake balance adjuster.
Interior :. Renault Sport master console to right of driver with all necessary switches ie. Masterswitch , ignition , start button , wipers, indicators, fan, screen demister etc. Switch for power steering. 1 x Corbeau Race seat , sabelt aircraft 3" Harness . Full manual Fire Extingisher system. XAP isolator. Spa fuel guage. Spa Dual Oil Pres/Oil Temp. Spa Dual Water Temp/Volts. Geartronics gear indicator.
Short term plans:
Two Seats with new mounts
Re-arrange interior
Tidy up wiring loom
Steering Wheel
Rev Counter/Speedo
A good clean/general tidy up
Parts to install:
Auto Marine Fusebox/Relay box
New DT Bonnet Pins
Seat
Harness
Wheel
Firstly, gave the arches a good clean/repaint,
Before
After
We are currently in the process of making some seat subframe/side mounts for the new seat to replace the old/far to heavy renaultsport ones (pics to follow).
New Chair
This should hopefully turn into a good WIP thread
Adam
I though I may as well start a build thread. My father and I recently bought a ph2 cup racer, mainly for trackdays to begin with then looking to enter in our local sprint championship in the new year.
We got the car from Scotland just before christmas and work has begun!
I managed to find a couple of pictures from previous owners...
The current spec of the car is: (Taken mostly from the listing)
Engine : Clio 182 sealed cup spec engine, Omex 600 ECU. Orbisound exhaust and sports cat.
Bodyshell : 2005 Lhd shell refinished inside / outside and underneath in 2k Renault Yellow. Around 900kg. Front strut brace. Electric power steering.
Gearbox : Sadev 6 speed sequential , Flat Shift ( Full Throttle ) Dog Engagement with Limited slip diff. Illumenated dash shift display.
Suspension : Renault Sport Cup spec non adjustable Bilstein Dampers. Modified Cup spec rear beam , Modified front Lower arms.
Brakes : Clio 182 Sport Calipers with Competition Mintex Discs and Carbone Lorraine RC6 and RC5+ pads, Goodridge Hoses and all lines throught inside of car. Brake balance adjuster.
Interior :. Renault Sport master console to right of driver with all necessary switches ie. Masterswitch , ignition , start button , wipers, indicators, fan, screen demister etc. Switch for power steering. 1 x Corbeau Race seat , sabelt aircraft 3" Harness . Full manual Fire Extingisher system. XAP isolator. Spa fuel guage. Spa Dual Oil Pres/Oil Temp. Spa Dual Water Temp/Volts. Geartronics gear indicator.
Short term plans:
Two Seats with new mounts
Re-arrange interior
Tidy up wiring loom
Steering Wheel
Rev Counter/Speedo
A good clean/general tidy up
Parts to install:
Auto Marine Fusebox/Relay box
New DT Bonnet Pins
Seat
Harness
Wheel
Firstly, gave the arches a good clean/repaint,
Before
After
We are currently in the process of making some seat subframe/side mounts for the new seat to replace the old/far to heavy renaultsport ones (pics to follow).
New Chair
This should hopefully turn into a good WIP thread
Adam