CAD Questions Thread?

Andy_con · Nov 22, 2016

Panda. said:
Something is afoot with your drawing, as 0.4xp should be 1.2500? I can't see what it is though!

thought it was just me, but I'm struggling.

ive used unitless

Andy_con · Dec 7, 2016

why cant i get this Renault logo to join (pedit) and be one shape?

www.purehighways.co.uk/test/197.dwg

botfch · Dec 7, 2016

Is it flat?

Andy_con · Dec 7, 2016

Archtronics said:
Is it flat?

??? hope so

botfch · Dec 7, 2016

I'm on my phone so I can't check side views but make sure everything's at the same height .

Andy_con · Dec 7, 2016

Archtronics said:
I'm on my phone so I can't check side views but make sure everything's at the same height .

looks flat, is there a command you can use to set everything at zero?

botfch · Dec 7, 2016

Type Flatten.

I find this can lock up my pc so usually I manually select all, go to properties and change the Z value to 0.

Also check your fuzz distance in the pedit command.

Andy_con · Dec 7, 2016

Archtronics said:
Type Flatten.

I find this can lock up my pc so usually I manually select all, go to properties and change the Z value to 0.

Also check your fuzz distance in the pedit command.

nope flatten didn't work 😧

(flatten worked, pedit afterwards didn't)

botfch · Dec 8, 2016

andy_con said:
nope flatten didn't work 😧

(flatten worked, pedit afterwards didn't)

Had a look at this on the pc, its because you've drawn them as closed polylines.

If you select the polylines (straights), go to properties, under misc, you should see closed (yes) change this back to No.
Then you should be able to join them all up. :smile:

Andy_con · Dec 8, 2016

Archtronics said:
Had a look at this on the pc, its because you've drawn them as closed polylines.

If you select the polylines (straights), go to properties, under misc, you should see closed (yes) change this back to No.
Then you should be able to join them all up. :smile:

ummm when I double click on a straight line to bring up properties I don't get that option - I am using cad 2006

botfch · Dec 8, 2016

Hmm, earliest I have is 2007 and it works ok in that.

Try right click properties?

Andy_con · Dec 8, 2016

Archtronics said:
Hmm, earliest I have is 2007 and it works ok in that.

Try right click properties?

nope still not there.

I get that option for a curve just not a straight line

Andy_con · Feb 12, 2017

gee I'm not sure whats going wrong tonight.

Ive done a drawing in 1:1 scale, ive setup up a new viewport and I'm not trying to scale the drawing to 1;100.

how do you do it again?

Rob · Feb 13, 2017

andy_con said:
gee I'm not sure whats going wrong tonight.

Ive done a drawing in 1:1 scale, ive setup up a new viewport and I'm not trying to scale the drawing to 1;100.

how do you do it again?

Click on the viewport itself, I.e the box shape, and then set the scale in the properties menu to 0.01

Andy_con · Feb 13, 2017

Rob said:
Click on the viewport itself, I.e the box shape, and then set the scale in the properties menu to 0.01

Thanks, it took me ages but you need to do zoom then #xp

I was missing the zoom command

Eddie. · Jun 20, 2017

Slight thread revival, does anyone in here do any AutoCAD freelance work?

Just something I've been thinking about doing as a little side earner, but don't really know where to start.

Rob · Jun 21, 2017

Eddie. said:
Slight thread revival, does anyone in here do any AutoCAD freelance work?

Just something I've been thinking about doing as a little side earner, but don't really know where to start.

I did. It's dried right up. Shame as it was ok. I found it through friends so can't really help.

botfch · Jun 21, 2017

Eddie. said:
Slight thread revival, does anyone in here do any AutoCAD freelance work?

Just something I've been thinking about doing as a little side earner, but don't really know where to start.

Plenty of Indian/Asia country's doing it so unless your willing to do it for peanuts there's not much out there.

Eddie. · Jun 21, 2017

Yeah I figured it would be undercut by anyone with a lower cost of living.

Just wondering, it's a shame as it's something I can do with my eyes shut these days.

Knuckles · Jun 21, 2017

Eddie. said:
Slight thread revival, does anyone in here do any AutoCAD freelance work?

Just something I've been thinking about doing as a little side earner, but don't really know where to start.

In what industry?

In mechanical engineering, autocad is the devil.

If you can, pick up solidworks or Catia. Much more scope for work

Eddie. · Jun 22, 2017

I'm training to be a Civil Engineer, should be qualified next summer, so AutoCAD will take a back seat in my world.

However, during my training, and for a good part of my working life, I've used AutoCAD, starting with kitchen design, and now for producing the more basic deliverables in the CE industry. Civil3D will be more my gig, in fact it is already really, but AutoCAD will always be around, I think.

My thought process was that as I start doing less and less AutoCAD work at work, I could do some on the side, because when it's basic work, I do enjoy putting some music on, and cracking through some drawings.

So to answer your question: Civil Engineering, specifically Strategic Highways, but interior/kitchen design is also there too.

Andy_con · Jul 21, 2017

could someone tell me why I cant extrude my shape?
doing my head in now

Panda. · Aug 15, 2017

Does anyone know if there's a way to replicate a shape (circle) along a polyline at equal spaces?

Essentially i need to show a 10m long retaining wall (made out of timber posts) along a curve, wondered if there's a quite way... (maybe @Rob or @Eddie. ?)

Eddie. · Aug 15, 2017

Yeah, array.

Draw polyline. Place circle on said polyline. Run command "array". Select circle. Choose "path". Select said polyline.

The array will produce a context sensitive ribbon, where you can adjust the spacing.

Rob · Aug 15, 2017

Yep. He's quite right. Then you can explode the array to make them individual items if required.

Andy_con · Nov 16, 2018

I know there are some very talented CAD people on CS.

any can do a xmas tree like this? I want to use my laser cutter to see how it turns out on some acrylic?

https://m.dhgate.com/product/chrismas-tree-3d-illusion-light-21-5-cm-laser/393705659.html

davo172 · Nov 16, 2018

Knuckles said:
In what industry?

In mechanical engineering, autocad is the devil.

If you can, pick up solidworks or Catia. Much more scope for work

Solidworks is full of win !!

Rob · Nov 16, 2018

andy_con said:
I know there are some very talented CAD people on CS.

any can do a xmas tree like this? I want to use my laser cutter to see how it turns out on some acrylic?

https://m.dhgate.com/product/chrismas-tree-3d-illusion-light-21-5-cm-laser/393705659.html

Link does-nay work

Andy_con · Nov 17, 2018

Rob said:
Link does-nay work

Your right let me see if I can find it again

Andy_con · Dec 11, 2018

Rob said:
Link does-nay work

hm works for me?

Andy_con · Dec 11, 2018

I need to draw the shape of these pedals, but am struggling.

anyone got any suggestions?

using the oval feature does not work, the shape is different

Pep · Dec 11, 2018

Best way would be to split the curve into several sections and then spline it.
If you can scan it in 1:1 scale email it to me and I'll do it and show you how on a DXF.

Knuckles · Dec 11, 2018

Two identical circles for the top and bottom rad and one larger one in the middle, connect them with a tangent arc?

Rob · Dec 11, 2018

For a mini?

I have one and am cad skilled... I feel this could work out!

Andy_con · Dec 12, 2018

JoePeps said:
Best way would be to split the curve into several sections and then spline it.
If you can scan it in 1:1 scale email it to me and I'll do it and show you how on a DXF.

didn't think of scanning it, good call. ive tried getting a camera lens centred before, taking a photo then trying to scale it so perfect size. but sadly it never comes out perfect.

I have a scanner, so will try that tonight.

Knuckles said:
Two identical circles for the top and bottom rad and one larger one in the middle, connect them with a tangent arc?

I understand what your saying but not sure how I would get top and bottom circles the perfect size.

Rob said:
For a mini?

I have one and am cad skilled... I feel this could work out!

yes yes and yes...

Andy_con · Mar 6, 2019

just in the process of making my son a plane shelf and I thought I know I could machine a propeller on my cnc router. ive drawn a simple 2d one but thought a sweet 3d one would be good.

anyone ever drawn one and got a design they would share?

before anyone says why not buy one, I like making things. and im making a plane shelf, not buying one!!

botfch · Mar 6, 2019

andy_con said:
just in the process of making my son a plane shelf and I thought I know I could machine a propeller on my cnc router. ive drawn a simple 2d one but thought a sweet 3d one would be good.

anyone ever drawn one and got a design they would share?

before anyone says why not buy one, I like making things. and im making a plane shelf, not buying one!!

View attachment 1409155

Should be quite a few on grabcad available for free.