Camber Bolts

[davM]

Where's the best place to buy some from?

I know K-Tec sell them but they seem over-priced.

Demon Tweeks sell them here http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=ROAD&pcode=EIBE5.81250K&app=Y but it says theyre only for clio's up to '98. Are mk1 clio's use the same fitment as my Cup?

I've got H&R's fitted if this makes a difference.

Cheers

 

[Firas]

they are not universal. you need to buy ones for a sport. non sport ones have a different size bore for the bolt

 

[davM]

Ah ok cheers.

Is there anywhere I can get them from thats cheaper than K-Tec?

 

[Cro]

they are not universal. you need to buy ones for a sport. non sport ones have a different size bore for the bolt

Im not sure if thats the case tbh, aren't all clio bolts and hub holes the same??

 

[Firas]

probably but i would stick with k tec h&R bolts. although expensive they are good talking from experience. ive not tried the eibach ones so cant comment on them

 

[Firas]

Im not sure if thats the case tbh, aren't all clio bolts and hub holes the same??

No mate. sport camber bolts are too big to fit in non sport hubs.

 

[Flying Frog]

I had the eibac hone on my twingo gt. and had no problem with them. You should go to your local car tuning shop and haggle a bit.

 

[davM]

There isnt really anywhere up here mate ^

The eibach camber bolts from K-Tec come to £50 delivered which is ridiculous. Where else can they be had from?

 

[Fred@BTM]

let me see what i can do

 

[davM]

Cheers Fred.

Need 'em by Thursday if possible

 

[pablo_ni]

Fred will you let me know too please?

 

[jesus]

Would the ones linked in the first post fit a MK2 non-sport, as it says only MK1's up to 1998... just wondering if the bolt sizes are the same?

 

[davM]

Fred will you let me know too please?

He can beat the k-tec price but only by a couple of £'s and thats for whiteline ones that only adjust 1.5 +/- degrees.

I ended ordering them from K-Tec this morning because I need them asap, but I'm not happy to be paying £50 for 2 bolts!

 

[uly8]

I've got a set of H&R camber correction bolts for a 172Cup that i've never had fitted (didn't bother getting new suspension in the end) that you can have for £35 posted ?

any use to you?

 

[Whiteley]

Mk1 hub bolts are smaller diameter than 172/182. Valver was 12mm, 182 14mm iirc.

 

[Fred@BTM]

^pikey way to do it

 

[davM]

Am I right in thinking I have been sent the wrong camber bolts from K-Tec...?

The one on the top is the one theyve sent and the bottom is the original.

I fitted them not realising and the hub moved about from the strut.

 

[davM]

Can anyone confirm these are the wrong bolts?

 

[Flying Frog]

they do even look the same diametre at all !!!!!!