dont take the engine out mate!!!
take off the battery and support the engine with a jack
remove air filter box / induction kit
take the gearbox mount off the box and chassis leg
remove the starter motor and water pipes above the gearbox.
loosen the bolts in the passenger side of the subframe to allow it to be pushed down to make a little bit of room
once the driveshafts are removed from the gearbox, take all the bolts out of the box and split it from the engine
if you pull the box into the passenger side arch and lever the subframe down there is enough room to tilt it vertically and lift it out past the engine, the engine may need lifting or lowering on the jack tho
hope this helps