TheBandit
ClioSport Club Member
What's the belt size?
What's the belt size?
I'm sure I slackened the tensioner and moved it forwards to alleviate the rubbing before. But then I also saw there was a dodgy shite set of tensioners as well cos there was someone on Facebook with the issue
It's just easier to f**k the lot off and run the full PMS kit![]()
Fair enough, SKF kit is 1660 for reference if it's any use in future
I didn't use a pulley delete kit but went for Lambert's style while maintaining the small bottom idler pulley
View attachment 1804789
Not that it helps you right now... but it's an option
You know what, that does help.
I didn’t realise that kit was as cheap so f**k it, I’ll order one of those and I’ll sack all the crap off with the tensioner. I’ll sell the PMS PAS delete pulley on once it’s done too.
What belt did you use if you kept the bottom pulley?
When i twanged mine it used to sound like thisThe new aux setup as suggested by @TheBandit arrived yesterday so went on today.
I really should have just done this the first time round when I sacked the PAS off but never thought of it. The only issue is that I’ve got no idea how tight the belt should be. When I twang it, it’s probably at about a D. So if anyone could twang their belt and decide what guitar string it corresponds to it would be great. But in seriousness, I’ll just fire it up and if it squeaks I can add a bit more tension.
View attachment 1805756
No sign of my PMS hydraulic clutch conversion thing and still can’t find the box bolts so pretty much stuck for things to do for now.
New belt set up looks loads better.
Gates do an app where you can pluck a belt and it tells you the frequency, I had to use it when doing the timing belts on my Ducati
https://www.gates.com/us/en/knowledge-center/calculators/belt-tension-calculator.html
Has got ball park figures for multi V aux belts too
Aye you will need to use the app above or a seem gauge to check tension.View attachment 1805776View attachment 1805777
Dci setting instructions above to give a rough idea. Measure frequency on longest length. From experience you will be tighter than you expect to get the correct frequency.