Clio big brake conversions?

[Noos]

Heuuuuuuu no you will have to adapt upright disk/ handbrake cable/hoses.

 

[Ph1 Tom]

hahahah

We're not joking!

 

[EVOgone]

Is there a bolt on increase size rear caliper you can fit ?

 

[Noos]

yes there is that only requied longer hand brake cable

i have one for sell. it come from citroen BX front caliper(yes that is stupid but that car had handbrake on front hand )

 

[alex_fuenla]

I have a Clio 1.8 16V with original hub clio 172.


I have also bought Brembo Clio 197.


My wheels are Speedline Turbine ET 36 / 6.5 'x 15'


I wonder if it is possible to put these calipers and separator few centimeters need.


Greetings!

 

[Chip-mk1]

If you space the wheel out a lot and only use a 280mm disk you should be ok.

 

[alex_fuenla]

If you space the wheel out a lot and only use a 280mm disk you should be ok.

Thanks for your answer.


I use 280mm disc brake and hubs Clio Sport 172.


I also use these 15 inch rims


http://i191.photobucket.com/albums/z83/christian1402/IMAG0874.jpg


On page 2 I have seen that the Brembo Sport Megane can be used in Oz Racing Clio Sport 172 with 30mm spacer (Et 43 7x15).


I wonder how many mm spacer need!


Has anyone tried this?


Greetings!

 

[Chip-mk1]

Its very specific to the wheel, you will just have to try it and see.

 

[EVOgone]

2118s are crap for wheel clearance, the old Williams speedlines are so much better when going 15"

 

[Dimitris85]

Is there any issue to the brake pedal with the use of oem brake discs (or other) with 24mm width combined with the clio's 197 brembos?
I mean that if there is any gap in the pedal once the disc (24mm) is thinner than the 197's disc.
(sorry for my English )

 

[MG cup]

Is there any issue to the brake pedal with the use of oem brake discs (or other) with 24mm width combined with the clio's 197 brembos?
I mean that if there is any gap in the pedal once the disc (24mm) is thinner than the 197's disc.
(sorry for my English )

No problem, its the same situation when the brake pads wear down. I have tested the calipers on 24mm disks to make sure the caliper pistons will not fall out or over stroke.

Also my 172 cup (uk car) has a better pedal feel too with the 197 Brembo callipers over the o.e.m caliper.

 

[Dimitris85]

Thanks mate!! I am thinking seriously these brembos!

 

[alex_fuenla]

Its very specific to the wheel, you will just have to try it and see.

Thanks mate.

I will try this.

 

[poziek]

Does anyone know where I can buy adapters to fit clio 3 brembo calipers into ph1 hubs and 280mm stock disks ?

 

[172lover]

http://www.motexperformance-shop.nl/c-1219122/contact/

http://www.cliosport.net/forum/show...uot-Big-Brake-Alternative-(Brembo-300mm-discs)

The brackets for 197/225 brembos are €250 iirc

 

[MG cup]

Does anyone know where I can buy adapters to fit clio 3 brembo calipers into ph1 hubs and 280mm stock disks ?

PM me

 

[George@RTR_Parts]

Does anyone know where I can buy adapters to fit clio 3 brembo calipers into ph1 hubs and 280mm stock disks ?

http://www.cliosport.net/forum/show...ing-Brembo-197-200-4-pot-callipers-to-172-182

 

[poziek]

Thank you guys !