Clio Mk1 (Williams) Heater Blower not working

[ukmattg]

I've just joined the Clio club with a Williams 1 (and really happy with it!) and need some help with the heater blower. I've discovered it's not working on any of the 3 speed settings.
The fuse is fine and the multiplug cable is reading 13.8v on the +'ve which sounds ok but not sure what the working range is.

The multiplug connector pins on the blower look ok - visually at least.
Is there anything else I can check or would it definitely be the blower?

 

[G Hut]

Failed resistor pack is a fav to fail, but normally you only lose a couple of speeds but assume all could fail...

Will look like this https://www.ebay.co.uk/itm/Renault-...2349624.m46890.l49286&mkrid=710-127635-2958-0

 

[ukmattg]

Failed resistor pack is a fav to fail, but normally you only lose a couple of speeds but assume all could fail...

Will look like this https://www.ebay.co.uk/itm/Renault-...2349624.m46890.l49286&mkrid=710-127635-2958-0

Thanks - I was wondering the same

 

[ukmattg]

I've not taken the blower out - do you know if the resistor pack is separate?

 

[G Hut]

Yes it will be, prob under scuttle at front not sure where on that model, quick Google should reveal for you. Likely a thread on here also just search

 

[ukmattg]

Tried power directly from the battery to the blower (having removed the resistor pack) and it worked. Resistor pack replaced and all back up and running. Thanks for the advice.