Clio mk2 ph1 1.2 8v ecu/key swap

[kountzero]

Hiya, Will I be able to swap out new ecu, barrel, coil, and keyfob to cure the bad keyfob issue? Or is there more to it, ie. The black box behind the dash (dunno if the car has one tbh not looked)? Can get a working combo from breakers for 50 quid which is loads cheaper than 140 for new key, could use quick answer if possible ait's been offered to me for 45 if I'm quick.
Regards, sean

 

[1hpclio]

Ye u will, uch will need to be bought too of same car...

 

[kountzero]

Fixed it! bought a keyfob from breakers yard for 3 quid.
Used a hot air rework station to lift the transponder coil off the board as You cant just unsolder them as they are bonded to the pcb with 5 little resin blobs which need to be melted too. You could cut it off with an exacto knife but danger of cracking the ferrite core or use a regular heat gun and lots of flux but also iffy.

Soldered to the old board and woohoo works! gonna get a spare transponder key cut asap now for emergencies.