ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Cold air feed again...



  Vectra 1.9 CDTi SRi 150
What? 65mm ID is too big? My old viper was bigger than that. My new Hill Power comes with 2 65mm feed pipes.
 

ant

  yep.
if you're going from here VV

Image206.gif



upto the filter, I think you need a bit more than a metre, sure mine was about 1200 but cant remember!
 
  Vectra 1.9 CDTi SRi 150
On looking to fit mine I have found there should be enough room for a 70mm feed which should easily be enough if fitted correctly. Hill Power kit is supplied with 2 60mm ID feeds. Hopefully there will be room. I think the idea is to replicate the original feeds, one down inside the wheel liner and the other into the rear of the n/s headlight.
 

Addz

ClioSport Club Member
  Trophy, TVR Tamora
i just got a few quids worth of flexi ducting stuff and a bag a tie wraps.. does the job and only cost like £3!

25022007345.jpg


25022007346.jpg
 

Addz

ClioSport Club Member
  Trophy, TVR Tamora
ahh good point.. forgot about the extra 800 odd cc the bigger boys have :(
 

DrR

ClioSport Club Member
  VW Golf GTD
There is no room to that in a sport.

Rubbish

Ive got a 4 inch bore pipe running from the fog right up to the space bellow the battery.

Just had to relocate the horns over a bit thats it

So like i said there is no room to do what addz did ;)

whats 4 inches in real measurements? I can't be bothered to take all my car apart.
 


Top