ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

crunching sound when braking



  DCI100
As title, i have a crunching sound when braking, like at slow speeds when i apply the brake lightly at slow speed. I can feel it through the brake pedal and its not very nice at all, i've have had the brakes of checked the pads and disks, and yes they're about ready to change, but there is still life left in them. although the pads on the inside have some damage, but still usable.

Could it be a wheel bearing? I'm lost, never felt that sort of crunch through a brake.
 
  182, SQ7, Trafic
Probably the inside ones perished completely and metal and metal.

Please for the sake of other road user don't use the car until you have new ones. You will also now need new discs as well as pads.
 
  DCI100
Nahh its not metal on metal, as i just took them off...... its only intermittent, like does it when you first press then goes away.

The pads have PLENTY of life in them although they will be changed when disks are changed. Car isn't being used at the moment.
 
  182, SQ7, Trafic
They have plenty of life in them but are about ready to change?

If your brake pads are damaged then they need changing. I'd imagine the grinding noise would go away too
 
  DCI100
They're is plenty of pad material left (not metal on metal) the, outside ones are in perfect condition actually, however the inside ones have plenty of material but have a couple of grooves in them.

theres not grit or durt on the disks or pads, so thats not the grinding noise!
 
  DCI100
Nice one mate :), warranty job for me :). Disks and pads i won't ask for on warranty as its where and tear. Already done 2000 miles over the month i owned it.
 
  Ph2 172
What condition are the discs in? Did you check in the inside faces of the discs too? The outer side may look fine through the wheel.
 
  DCI100
Had the pads out, and i am going to be changing the disks and pads too. I'M not driving the car.

There is plenty of material left on pads. however the rear has a small amount of damage but are safe to use. on both sides not massively bad. disks have life left in them but as a matter of course will be changed.

Just need to get the new abs ring fitted and then get it sorted.
 


Top