ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Discounted 1*2 parts
Will fail the MOT if the brake light is not working 
Giulietta 940
Will fail the MOT if the brake light is not working
Seems I've been very lucky then :rasp:
Discounted 1*2 parts
200
Some complete assclown has stolen the bulbs/led's/whatever's in there from my spoiler, right outside my front door. I am fuming!
Came out today and noticed the fitment sticking out from the spoiler. Pushed it back in thinking it was strange but didn't give it a second thought. Only when it got dark while out driving in traffic that I looked in the rear view. Normally when stopped in traffic you can see the glow of the stoplight reflecting in the windscreen of the car behind, I didn't see this glow then it dawned on me.....
And what's more annoying is now I can't even get the fitment out myself. The thief seemed to manage easily enough without causing any damage?!
What's the current price for a replacement?
Will I have to set up CCTV to protect my stoplight in future?
Came out today and noticed the fitment sticking out from the spoiler. Pushed it back in thinking it was strange but didn't give it a second thought. Only when it got dark while out driving in traffic that I looked in the rear view. Normally when stopped in traffic you can see the glow of the stoplight reflecting in the windscreen of the car behind, I didn't see this glow then it dawned on me.....
And what's more annoying is now I can't even get the fitment out myself. The thief seemed to manage easily enough without causing any damage?!
What's the current price for a replacement?
Will I have to set up CCTV to protect my stoplight in future?
You need to take the spoiler off mate, inside there is 2 nuts (8 - 10mm IIRC) take them off it slides out but I think the module is sealed eitherway so you cant get in
Ohh I have a Spoiler from a PH1 172 and it has 2 brass/gold coloured nuts on the inside I just unbolted them and pulled the brake light module out the spoiler
172 cup- suzu rf600r
Yep its fairly common I think water seeps into it, might be worth putting some silicon or similar on the circuit board before fitting? Thats my plan for the next one anyway
You don't need it for the MOT though, would likely just be an advisory or not mentioned at all
You don't need it for the MOT though, would likely just be an advisory or not mentioned at all
Titanium Clio 182
No it wont!!Will fail the MOT if the brake light is not working
Mine isn't working and passed, it was ut down as an advisory all they put on it was "Upper brake light inop"
Gus
ClioSport Moderator
182Turbo,DCi90
@markclio - I used a small flat blade screw driver on the right edge, it will then slide back at you. perhaps use bit of masking tape on the point that you pivot the screw driver against the spoiler.
http://www.cliosport.net/threads/cup-spoiler-led-bar.756996/#post-10459975
http://www.cliosport.net/threads/cup-spoiler-led-bar.756996/#post-10459975
ixell
ClioSport Club Member
Clio 172 cup phase 2
HiAnd if you pm me I can sell you one cheap too
Are you able to sell me a stop light for the cup version spoiler ?
