ph1 track weapon
so after the S4 went to its new home in the North, and the house going forward, we needed to get a couple of cheap runarounds
so here's the first of them.
1991 Eunos Roadster
80k kms from new
1 UK owner who was a mx5oc member and recorded every tank of fuel that went, mileage per fill and cost per fill
RUST FREE
spec wise its running some nice BBS wheels that will be getting a refurb soon, seems a bit lower, but shocks and springs look standard and its pretty stiff!
HKS Panel filter in standard airbox
some kind of posh polished rollbar thats chassis mounted
plans for the future are to service it primarily as the dreaded hydraulic lifters are tapping a bit. It hasnt been used much in the past 6 months so we've been reccomended a good service and a tanks worth of abuse should unstick everything
following this thigns are as follows:
exhaust system with a decat - nothing massively loud, but a raspy power-releasing kit would be nice
induction kit of some sort, most likely K+N
Uprate the suspension - either meisterS coilovers or ebay specials
lower front brace
sticky rubber
some wider wheels for a bit of drift/track fun
a uk spec headunit as the one in there doesnt work at all
A full Geo setup with some poly bushes
so a few pics for now. progress will be brisk hopefully
so here's the first of them.
1991 Eunos Roadster
80k kms from new
1 UK owner who was a mx5oc member and recorded every tank of fuel that went, mileage per fill and cost per fill
RUST FREE
spec wise its running some nice BBS wheels that will be getting a refurb soon, seems a bit lower, but shocks and springs look standard and its pretty stiff!
HKS Panel filter in standard airbox
some kind of posh polished rollbar thats chassis mounted
plans for the future are to service it primarily as the dreaded hydraulic lifters are tapping a bit. It hasnt been used much in the past 6 months so we've been reccomended a good service and a tanks worth of abuse should unstick everything
following this thigns are as follows:
exhaust system with a decat - nothing massively loud, but a raspy power-releasing kit would be nice
induction kit of some sort, most likely K+N
Uprate the suspension - either meisterS coilovers or ebay specials
lower front brace
sticky rubber
some wider wheels for a bit of drift/track fun
a uk spec headunit as the one in there doesnt work at all
A full Geo setup with some poly bushes
so a few pics for now. progress will be brisk hopefully