Epas Mains connection terminals

[finch wxm]

I have an epas kit with this connector, have people rewired and got new spares that fit or just jointed the cable from here ? If so what did you use ?

 

[Brigsy]

Join straight onto the cut cables with an uninsulated crimp and cover with dual wall heatshrink. Ideally you want a hydraulic crimper and ferrule to suit, about £30 off ebay.

Id also consider wiring the epas ecu up to the car properly instead of the potentiometer setup, as it does not work right and feels awful.

 

[finch wxm]

Join straight onto the cut cables with an uninsulated crimp and cover with dual wall heatshrink. Ideally you want a hydraulic crimper and ferrule to suit, about £30 off ebay.

Id also consider wiring the epas ecu up to the car properly instead of the potentiometer setup, as it does not work right and feels awful.

Oh right is there any info for this on here ?

 

[Brigsy]

Info on here regarding how to wire up properly so the epas ecu sees vehicle speed and rpm. https://cliosport.net/threads/epas-fault-help.841005/

Some pics on my Trophy thread too post #312 https://cliosport.net/threads/t-turbo-is-back.536356/page-8#post-12324798

Its awful with the potentiometer setup though mate. Crap assistance at low speed then you will be forever adjusting it when at speed. It feels decent now wired up right, difference is night and day.

 

[JamesBryan]

As Brigsy said, wire it up his way.

I've driven one wired the basic way and the resistance through the wheel isn't consistent.

 

[finch wxm]

Thanks for the info i will wire it in properly