ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

FAO Edde re Dynamique bumper removal



Clart

ClioSport Club Member
Just pm'd you but your mailbox is full. Could you please send me the guide for removing the front bumper?

Cheers.
 
  CB600FS
Dead easy Clart, remove the T20s at the front of the arch liner, and pull it back slightly, then 2 X 10mm bolts inside each arch liner (at the top going upwards where the wing joins the bumper. Then there is a T20 screw either side underneath where the arch liner is attached to the bumper. 2 X 10mm bolts underneath towards the centre and set back slightly, on the black trim underneath. Pop the bonnet and remove the 2 X clips in the black trim going onto the T piece, then lever the bumper forward / outwards either side at a time, best with a mate on one side, unclip fog lights. Done - 10 mins max.

Theres a quick guide on this thread aswell - similar to the Ph1s.
http://www.cliosport.net/forum/showthread.php?t=290355&highlight=radiator
 


Top