Fitting cup spoiler guide please?

[Alex5]

Any guides on here on how to fit a cup spoiler to a non sport, can't find any : /

 

[rbrocky]

1. unbolt old one
2. bolt on new one

 

[daveski]

Remove 6 bolts holding the original on, remove original then refit cup spoiler and put the 6 screws in.

Its basically as simple as that. Two screws on both sides of the boot and two in the middle.

 

[stephen chadwick]

if i remember correctly there are 6 torques screws 2 on the left end, 2 on the right and 2 in the middle, the hardest part will be keeping the wiring for the brake light and the washer hose in the correct position so the spoiler can sit flush, i use double sided foam tape to hold them in place when fitting, having someone to hold it for you reall makes it allot easier

 

[Harpham]

If I can fit one without any instructions, then any r****d can.

 

[stephen chadwick]

If I can fit one without any instructions, then any r****d can.

you'd be surprised lol

 

[Alex5]

I'll give It a go, sounds easy enough

 

[.Stevo.C.]

I would say its as easy as changing a wheel.

 

[Alex5]

All fitted , wasn't Super easy as had a bit of trouble lining up the screws and holes but didnt take too long