Fitting Harnesses to Recaro Seated 182

[Dave]

I want to fit harnesses to my car as above, but I want them to be removable and keep the standard seatbelts also, as per the link below:

http://www.trackntune.net/forum/index.php?topic=130.0

However I dont want to drill holes into the subframes like has been done there, so where else can I use to mount the lap belts?


Thanks

Dave

 

[Dave]

Anyone?

 

[Lee]

I'm pretty sure Wayne looked at lots of ways but the only safe one was to drill those holes.

Once he's done with them he's just going to put little black plastic bungs in the holes, you'll never notice them.

 

[Dave]

Lee

Do you think it would be possible to use the exisiting mounts that are used for the OE bolts?

i.e on the handbrake side, the bolt that holds the seat belt socket and prentensioner, and on the outside, the bolt that holds the bottom of the seat belt on a small rail?

Could those for instance be replaced with Eye-Bolts?

 

[Lee]

Best thing to do is ask Wayne mate. I just know that he looked at lots of different ways of doing it to avoid drilling the frames, but couldn't come up with one that was both safe and positioned the harness properly.